Search found 103 matches

by dale_che
Sun Jan 29, 2017 4:46 pm
Forum: Elite Series
Topic: Ignition problems with RB32 and Elite 2500
Replies: 33
Views: 3280

Re: Ignition problems with RB32 and Elite 2500

I think there needs to be an urgent action that needs to be taken with all these issues that people seem to be having. It has been going on since July. For me started off with abs voltage ref error and with every firmware has gotten worse. Haltech please resolve these issues and give us a firmware ...
by dale_che
Mon Aug 29, 2016 8:14 pm
Forum: Elite Software Programmer (ESP)
Topic: Driveshaft speed sensor/vehicle speed sensor
Replies: 14
Views: 2648

Re: Driveshaft speed sensor/vehicle speed sensor

onfire wrote:Splitting the signal does work. Just did it to send mph to the iq3. All works.


if you only want it for speed on your IQ3 you can just send the DS RPM to the dash and set the DS RPM as the speed channel and use the maths to convert to speed.
by dale_che
Mon Aug 29, 2016 8:12 pm
Forum: Elite Series
Topic: Will a 2500 run Moran 500lb injectors
Replies: 1
Views: 353

Re: Will a 2500 run Moran 500lb injectors

yes no problems at all,
by dale_che
Mon Aug 22, 2016 5:39 pm
Forum: Elite Software Programmer (ESP)
Topic: Lost all Main Tabs on 2.18
Replies: 1
Views: 413

Re: Lost all Main Tabs on 2.18

i saw this over the weekend on a customers laptop, try changing the permissions on the haltech folder under documents to have full permissions,
by dale_che
Mon Aug 15, 2016 8:19 pm
Forum: Elite Series
Topic: elite electronic trans control & nitrous control
Replies: 1
Views: 398

Re: elite electronic trans control & nitrous control

no trans control you would need to use something like a PCS controller,

the elite 1500 and 2500 can control up to 6 stages of Nitrous
by dale_che
Wed Jun 15, 2016 7:23 pm
Forum: Elite Series
Topic: What is the race expansion module?
Replies: 17
Views: 5944

Re: What is the race expansion module?

LS1king000 wrote:I can't seem to find the REM in the online store anymore. What's up? Was about to pull the trigger on a purchase.


the REM is in final testing, im not 100% sure on the public release data but it shouldn't be too long
by dale_che
Wed Jun 15, 2016 7:21 pm
Forum: Elite Series
Topic: What is the race expansion module?
Replies: 17
Views: 5944

Re: What is the race expansion module?

if you are not a drag racer then it will do nothing for you, it is for drag racing use only. Yes my car is built to drag race. And I know traction control is standard. But it needs a driven and non driven wheel speed input. Which I don't have as all 4 are driven. I want to know what what will be pa...
by dale_che
Sat Jun 04, 2016 7:43 pm
Forum: Elite Software Programmer (ESP)
Topic: Why torque management function need REM?
Replies: 6
Views: 1072

Re: Why torque management function need REM?

the upgrade is not just software, its totally new hardware that is required, the torque management is used in drag racing to limit wheel spin, it not reactive and requires a pre set curve, any time the ecu sees the drive shaft rpm exceed the pre set curve it will take what ever action you have progr...
by dale_che
Sat Jun 04, 2016 6:23 pm
Forum: Elite Series
Topic: What is the race expansion module?
Replies: 17
Views: 5944

Re: What is the race expansion module?

I'm really curious to know what is included in the the advanced torque management upgrade if this is something that i could benefit from using. Now the update will probably cost more since I already own the ecu vs buying the elite 2500t with torque management. what ever happened to this ? http://s3...
by dale_che
Sat Jun 04, 2016 6:21 pm
Forum: Elite Series
Topic: What is the race expansion module?
Replies: 17
Views: 5944

Re: What is the race expansion module?

what I really want to know if theres a way to make the traction control work with the standard elite on an awd car or if I would need to update my ecu with advanced torque management and use torque management along with a driveshaft speed? traction control is standard on the elite, go to functions ...
by dale_che
Sun Oct 25, 2015 6:58 pm
Forum: Platinum Pro Plug-in
Topic: R33 Plug n Play ECU w/ flex fuel sensor
Replies: 9
Views: 2402

Re: R33 Plug n Play ECU w/ flex fuel sensor

Yes!! be nice to be able to still run single maf and use other maf digital input for FF When i learned i needed to spend more money just to run flex fuel after it was advertised pretty shady like, i was pretty pissed off, discount or not.. your at the time flag ship ECU needing another 500 bucks th...
by dale_che
Thu Oct 22, 2015 7:39 pm
Forum: Elite Software Programmer (ESP)
Topic: Nitrous Control?
Replies: 7
Views: 1878

Re: Nitrous Control?

yes dominator, derek and the Elco is using the elite for Dry control,

it it working perfect and should be in the next release.
by dale_che
Thu Jul 23, 2015 12:02 pm
Forum: Elite Series
Topic: All of the sudden ESP won't open. Latest 2.00.5
Replies: 2
Views: 569

Re: All of the sudden ESP won't open. Latest 2.00.5

i had the same problem this week

add the ESP.exe to the exclusions list in AVG or remove avg all together
by dale_che
Sat Jun 06, 2015 8:41 pm
Forum: Elite Series
Topic: 2500 Elite allow for time alignment of crank and cam?
Replies: 3
Views: 1118

Re: 2500 Elite allow for time alignment of crank and cam?

the 60-2 is simple and a more normal trigger type than the 24x

ill get some pics of my alignment tool its pretty crude but does the job perfectly!
by dale_che
Thu Jun 04, 2015 10:57 am
Forum: Elite Series
Topic: 2500 Elite allow for time alignment of crank and cam?
Replies: 3
Views: 1118

Re: 2500 Elite allow for time alignment of crank and cam?

i have done plenty of the 58x crank wheels with the single home, works perfectly,

FWIW you are not the only person to have the crank wheel off by a large amount, i have a tool i made to check all the wheels before we assemble any motor.

Go to advanced search