Search found 7 matches

by 3point5
Sun Aug 23, 2015 2:58 pm
Forum: Platinum Pro Harness
Topic: New to Haltech(ish) - starting issue? possibly map?
Replies: 2
Views: 2821

Re: New to Haltech(ish) - starting issue? possibly map?

added to what baselkwt said - download the factory service manual and get your coils against a ohm meter. I labelled every cylinder and each coil/injector bc Nissan did not make the physical wiring layout logical. Are you getting any check engine lights/codes? I would also suggest either watching or...
by 3point5
Sun Aug 23, 2015 2:48 pm
Forum: Platinum Pro Harness
Topic: Wideband problems
Replies: 1
Views: 2928

Re: Wideband problems

post revival...

If you go into your Main Setup(F4) and your input tab will have O2 calibrations that are out. Your O2 sensors are reading correctly and feeding the haltech a correct voltage value but your O2 sensor table needs to be dialed in.
by 3point5
Tue Mar 17, 2015 3:00 pm
Forum: Platinum Pro Harness
Topic: Need OLD Map 1.00.1 or older please!!!! LOCKED ECU
Replies: 2
Views: 2495

Re: Need OLD Map 1.00.1 or older please!!!! LOCKED ECU

GOT IT!!! I would like to take a minute to say thank you to ERIC at Haltech, I called him at 430PM yesterday, and this guy went way, way out of his way to help. By 930PM that night I had an email with 2 files. And this was not an easy find for him, I know that, because he didn't have anything at al...
by 3point5
Sat Mar 07, 2015 12:47 pm
Forum: Platinum Pro Harness
Topic: Haltech Platinum with I/O Expander problem
Replies: 12
Views: 6498

Re: Haltech Platinum with I/O Expander problem

Please go to our website and download the latest firmware for the 350Z which is 1.10.5 Upgrade your ECU to this and it should fix your issue. Please ensure your main power connections on the I/O box are connected to their respective sources. ( ie +12V and Grounds) Cheers Hey Adam - I was looking to...
by 3point5
Tue Sep 24, 2013 12:49 pm
Forum: Platinum Pro Harness
Topic: Burning up coils
Replies: 11
Views: 9859

Re: Burning up coils

Hardly relevant to a coil problem... never said it was a coil problem, but when a high impedance injector is replaced with a low impedance injector the drop in impedance forces the circuit to draw more current through the injector controller. Excess current through the system means excess heat - wh...
by 3point5
Sun Sep 22, 2013 10:13 am
Forum: Platinum Pro Harness
Topic: Burning up coils
Replies: 11
Views: 9859

Re: Burning up coils

hate to bump an old thread and if nothing more for future help - have you checked to make sure your using high impedance injectors?
by 3point5
Fri Sep 06, 2013 3:05 pm
Forum: Off-Topic
Topic: Member Intro -
Replies: 1
Views: 2999

Member Intro -

Hey guys - Just wanted to introduce myself, my name is James - running the Haltech PnP on a VQDE in a 03 350z, built block, greddy twin 18gs, a bunch of cooling mods and weight reduction steps. My z is a garage sitter... I've owned the car since 2005, supercharged (procharger 375whp/320wt) since 200...

Go to advanced search