Search found 2342 matches

by HaltechMatthew
Fri Feb 23, 2018 12:36 pm
Forum: Platinum Sprint Series
Topic: sprint 500 miss countr
Replies: 1
Views: 19

Re: sprint 500 miss countr

Check with a scope to be certain you have the correct edge, and other than that you can experiment with the trigger voltage tables.
by HaltechMatthew
Fri Feb 23, 2018 12:32 pm
Forum: Platinum Sport Series
Topic: RB30E No start issue
Replies: 3
Views: 13

Re: RB30E No start issue

Attach your Map and more specs on the components you are using.
by HaltechMatthew
Fri Feb 23, 2018 11:58 am
Forum: Elite Series
Topic: Erratic Ignition Elite 2500
Replies: 4
Views: 59

Re: Erratic Ignition Elite 2500

If the scope says you dont have a cam signal and the crank signal has a lot of noise then you need to look at sensors and wiring more than anything.
by HaltechMatthew
Thu Feb 22, 2018 2:26 pm
Forum: Elite Series
Topic: Erratic Ignition Elite 2500
Replies: 4
Views: 59

Re: Erratic Ignition Elite 2500

I would put a scope on the signals to see what exactly is getting to the ECU.
by HaltechMatthew
Wed Feb 21, 2018 3:47 pm
Forum: E11v2/E8
Topic: E11v2 with msd dis 4 plus
Replies: 3
Views: 144

Re: E11v2 with msd dis 4 plus

Correct. Something to do with a break time, but it is not documented. 3.0ms works fine.
by HaltechMatthew
Wed Feb 21, 2018 3:42 pm
Forum: Platinum Sprint Series
Topic: Sprint 500 20V 4AGE
Replies: 1
Views: 44

Re: Sprint 500 20V 4AGE

OEM O2 sensor is narrow band and most likely does not work correctly anymore given the age of the engine. You could use it if it works for cruising, but not for engine tuning under power. PS500 only does open loop idle and does not support 3-wire types. You would connect one output to the side that ...
by HaltechMatthew
Wed Feb 21, 2018 3:37 pm
Forum: Platinum Sport Series
Topic: PS1000 dropping out under load
Replies: 1
Views: 72

Re: PS1000 dropping out under load

If your door locks are cycling then something in the wiring of the car is an issue and not ECU related. Even more so if it is still online and you still see RPM while this occurs.
by HaltechMatthew
Wed Feb 21, 2018 3:27 pm
Forum: Platinum Pro Plug-in
Topic: boost soleniod control spike
Replies: 1
Views: 49

Re: boost soleniod control spike

Map and log. But these things are better solved by talking directly to us when you are there with the car. Its why we have 6 guys on the phones here and emails going all day. Forum is checked last when we are not directly interacting with our customers.
by HaltechMatthew
Wed Feb 21, 2018 3:19 pm
Forum: Elite Series
Topic: Adding boost to tps load base map
Replies: 2
Views: 60

Re: Adding boost to tps load base map

MAP should reference vacuum and boost. Internal is a 3 bar in the Elite.
by HaltechMatthew
Wed Feb 21, 2018 3:17 pm
Forum: Elite Series
Topic: Torque Reduction function for sequential trans?
Replies: 2
Views: 52

Re: Torque Reduction function for sequential trans?

Contact us directly when you are doing this and we can help with the details.
by HaltechMatthew
Fri Feb 16, 2018 2:48 pm
Forum: E11v2/E8
Topic: E11V2 Peugeot 205 New install
Replies: 3
Views: 48

Re: E11V2 Peugeot 205 New install

Any narrow band sensor will work. Try to use a 3 or 4 wire type so it has a heater.
by HaltechMatthew
Fri Feb 16, 2018 2:07 pm
Forum: E11v2/E8
Topic: e11v2 Launch Control Wiring
Replies: 1
Views: 33

Re: e11v2 Launch Control Wiring

P115 of the manual.
by HaltechMatthew
Fri Feb 16, 2018 10:46 am
Forum: Elite Series
Topic: Toyota 1UZFE and an Elite 2000 (or other Haltech ecu), anyone?
Replies: 6
Views: 84

Re: Toyota 1UZFE and an Elite 2000 (or other Haltech ecu), anyone?

As your title says, the Elite 2000 is the model to pick so you have done well there. These are fairly straight forward engines to work with we even used a 1UZ as a development mule for 15 years or so through the late 90's to 00's. As mentioned, go the widebands and the rest of the OEM sensors will b...
by HaltechMatthew
Mon Feb 12, 2018 10:52 am
Forum: Platinum Sport Series
Topic: Honda CBR 600 Trigger Setup
Replies: 1
Views: 59

Re: Honda CBR 600 Trigger Setup

Honda AP1 trigger.
by HaltechMatthew
Mon Feb 12, 2018 10:49 am
Forum: Elite Series
Topic: turbo speed sensor input
Replies: 5
Views: 176

Re: turbo speed sensor input

If you have used them all up you can add an IO12 expander or even a REM.

Go to advanced search