Search found 2288 matches

by HaltechMatthew
Wed Jan 17, 2018 1:41 pm
Forum: ECU Manager
Topic: Axis Corrupt
Replies: 1
Views: 65

Re: Axis Corrupt

If the axis is greyed out then it is not being used. Otherwise we need more information like which ECU and you should attach the map file.
by HaltechMatthew
Wed Jan 17, 2018 1:39 pm
Forum: Platinum Sprint Series
Topic: b16a haltech basemap
Replies: 3
Views: 106

Re: b16a haltech basemap

Solution is to tune or visit a tuner.
by HaltechMatthew
Wed Jan 17, 2018 1:38 pm
Forum: Platinum Sprint Series
Topic: Sprint 500 Can Bus
Replies: 1
Views: 28

Re: Sprint 500 Can Bus

No. Haltech CAN only.

Platinum range cannot talk to OEM CAN bus. Only Elite 1500 and 2500 models can do this.
by HaltechMatthew
Wed Jan 17, 2018 1:37 pm
Forum: Platinum Sport Series
Topic: Pin #26 (injector power input) & engine stop-switch
Replies: 6
Views: 632

Re: Pin #26 (injector power input) & engine stop-switch

I would say so, yes. It is just a 12V input to power things like the stepper motor controller, but it also provides the source for the ignition 12V pullup. Usually without this pin being connected you do not get ignition output.
by HaltechMatthew
Wed Jan 17, 2018 1:34 pm
Forum: Elite Series
Topic: DBW TPS reversal
Replies: 13
Views: 149

Re: DBW TPS reversal

Correct. You must use both outputs as they will alternate at high speed between which one is power or ground. DBW throttles are not big solenoids that are duty pulsed to open. Also correct is the wiring, and this is stated on the wiring diagram. A26 powers the DBW controller, the ignition pullups, a...
by HaltechMatthew
Mon Jan 15, 2018 3:40 pm
Forum: Elite Series
Topic: What is disenrich?
Replies: 3
Views: 119

Re: What is disenrich?

Anytime you lift off the throttle the reverse occurs from when you get on the throttle. If you feel you do not need it you can leave it disabled.
by HaltechMatthew
Mon Jan 15, 2018 3:39 pm
Forum: Elite Series
Topic: Elite 750 & 2jzgte igniter
Replies: 9
Views: 125

Re: Elite 750 & 2jzgte igniter

Wire it to the ignitor. You are over-thinking it :D
Default settings will work with it too. Direct Fire, Constant Charge, Falling edge.
by HaltechMatthew
Mon Jan 15, 2018 3:34 pm
Forum: Elite Series
Topic: Truck coil grounding with Elite 1500
Replies: 5
Views: 82

Re: Truck coil grounding with Elite 1500

I would put them all to the engine block, even though that is not what the manufacturer says. It ensures your coil doesn't become an engine ground strap should something go wrong.
by HaltechMatthew
Mon Jan 15, 2018 3:22 pm
Forum: Elite Series
Topic: 2500 elite into wrx hatch 2010
Replies: 6
Views: 218

Re: 2500 elite into wrx hatch 2010

I saw the LPW table in the list for v2.26. Maybe a few weeks away.

Note there will not be a 2.25, as this is already a release version for the Elite 950. It jumps to v2.26.
by HaltechMatthew
Mon Jan 15, 2018 3:08 pm
Forum: Elite Series
Topic: Elite Series Manuals
Replies: 1
Views: 72

Re: Elite Series Manuals

Its all in the Help section of the software.
by HaltechMatthew
Mon Jan 15, 2018 2:50 pm
Forum: Elite Series
Topic: LS3 with no timing marks, TDC offset angle
Replies: 6
Views: 108

Re: LS3 with no timing marks, TDC offset angle

Many just simply lock it one side, mark the pulley, then lock it the other side, mark it again and use the middle of the two marks. You would have to be so close that you are really talking sub one degree here. 441 seems to be a common number for the Gen 4, but I have seen multiple numbers that peop...
by HaltechMatthew
Wed Jan 10, 2018 2:18 pm
Forum: Platinum Sport Series
Topic: How to wire the vvti on a 2jz and start it up
Replies: 1
Views: 60

Re: How to wire the vvti on a 2jz and start it up

VVT wires to any spare output and 12V+ Swtiched.
by HaltechMatthew
Wed Jan 10, 2018 2:16 pm
Forum: Platinum Pro Plug-in
Topic: setting up 02 sensors
Replies: 2
Views: 62

Re: setting up 02 sensors

No it is not possible. Elite range can do this.
by HaltechMatthew
Wed Jan 10, 2018 2:15 pm
Forum: Platinum Pro Plug-in
Topic: Innovate ecf-1 , for flex fuel
Replies: 1
Views: 38

Re: Innovate ecf-1 , for flex fuel

Either way will work.

Go to advanced search