Search found 2522 matches

by HaltechMatthew
Wed Dec 12, 2018 10:25 am
Forum: E11v2/E8
Topic: E11V2 fuel scale factor
Replies: 2
Views: 12

Re: E11V2 fuel scale factor

100% give you 100% of what you asked. 50% would halve it, 200% would double it. It is the old school way of having an overall trim where these days it is set as 0% by default and you would have positive or negative corrections. But back then everyone was on drugs and 100% means you get what you aske...
by HaltechMatthew
Wed Dec 12, 2018 10:22 am
Forum: Elite Series
Topic: 2g DSM (4g63) ignition outputs
Replies: 4
Views: 24

Re: 2g DSM (4g63) ignition outputs

Hi answer is still correct though. You cannot direct drive the coil itself from the ECU. There needs to be an igniter module or CDI box between the coil and ECU. The Toyota Yaris (actually any of the Toyota 4-pin coils are the same) style coils and most modern coils for that matter have the igniter ...
by HaltechMatthew
Wed Dec 12, 2018 10:13 am
Forum: Elite Series
Topic: What Elite ECU for a 3UR-FE swap?
Replies: 3
Views: 36

Re: What Elite ECU for a 3UR-FE swap?

You can use any ECU that can control the injectors and coils, so yes your PS2000 would work for this.
by HaltechMatthew
Tue Dec 11, 2018 11:22 am
Forum: Elite Series
Topic: 2g DSM (eclipse) 4g63
Replies: 2
Views: 15

Re: 2g DSM (eclipse) 4g63

The diagram is on the website.

Nothing on the stepper motor is 5V, it uses 12V.

https://www.haltech.com/wp-content/uplo ... ations.pdf
by HaltechMatthew
Tue Dec 11, 2018 10:19 am
Forum: Platinum Sprint Series
Topic: 2jz injector problem
Replies: 3
Views: 1051

Re: 2jz injector problem

You don't need the cam sensor because you can only run semi-seq and waste.

But I think you are already onto it. It was working and now it doesn't after pulling out the engine usually means something is disconnected.
by HaltechMatthew
Tue Dec 11, 2018 10:07 am
Forum: Platinum Sport Series
Topic: PS2000 equipped 2Jz - intermittent problem - HELP
Replies: 5
Views: 1223

Re: PS2000 equipped 2Jz - intermittent problem - HELP

It is an internal fuse in the ECU, like a circuit breaker. If this is happening it needs to come back to us.
by HaltechMatthew
Tue Dec 11, 2018 9:45 am
Forum: Elite Software Programmer (ESP)
Topic: Low PW Compensation
Replies: 22
Views: 4097

Re: Low PW Compensation

You cant use percentage because it is not a percentage you are correcting for it is an accrued amount of full open flow injection time. Their data is not so useable in that format. At best you could say it is a percentage of that commanded injection time, do the sums, and enter that corrected inject...
by HaltechMatthew
Tue Dec 11, 2018 9:32 am
Forum: Elite Software Programmer (ESP)
Topic: MULTI-SEQUENTIAL FUEL BASE MAP?
Replies: 1
Views: 54

Re: MULTI-SEQUENTIAL FUEL BASE MAP?

Yes to all except having separate maps for primary and secondary. The staging model is a fuel-on-demand setup where secondary injectors are introduced when the primary injectors reach a certain amount of duty. When combined the duty drops below another certain amount it will switch back to primary o...
by HaltechMatthew
Tue Dec 11, 2018 9:29 am
Forum: Elite Series
Topic: What Elite ECU for a 3UR-FE swap?
Replies: 3
Views: 36

Re: What Elite ECU for a 3UR-FE swap?

The only ECU that will run 4x variable cams on a V8 is the Elite 2500. The PS2000 definitely wont, it will only do 2x cams at best.
by HaltechMatthew
Tue Dec 11, 2018 9:18 am
Forum: Elite Series
Topic: turbo speed sensor input
Replies: 9
Views: 1011

Re: turbo speed sensor input

The sensors have their own pulse dividers built in so the frequency is not that high.
by HaltechMatthew
Fri Dec 07, 2018 10:37 am
Forum: Elite Software Programmer (ESP)
Topic: Keeping ESP layout after updates
Replies: 3
Views: 166

Re: Keeping ESP layout after updates

It already does this.

The guys are already working on it.
by HaltechMatthew
Fri Dec 07, 2018 10:36 am
Forum: Elite Series
Topic: ELITE HOME TRIGGER ERROR
Replies: 1
Views: 72

Re: ELITE HOME TRIGGER ERROR

Put your scopoe on it and check you have the correct polarity rather than guessing. Then work from there.
by HaltechMatthew
Tue Dec 04, 2018 9:34 am
Forum: E11v2/E8
Topic: thermo switching
Replies: 4
Views: 159

Re: thermo switching

Yes. There is a tick box to Disable when Engine Stopped.
by HaltechMatthew
Mon Dec 03, 2018 4:02 pm
Forum: Platinum Pro Harness
Topic: 350z Platinum Pro Harness Installed in 03 Nissan Maxima - Help needed
Replies: 1
Views: 57

Re: 350z Platinum Pro Harness Installed in 03 Nissan Maxima - Help needed

Keep in mind that this kit was never intended for anything other than a 350Z. Nobody here at Haltech will know anything about making it run on a Maxima. Maybe some other users will be able to help. So... The timing is off. They have the same crank and cam pattern as a 350Z but the crank trigger is i...
by HaltechMatthew
Mon Dec 03, 2018 1:30 pm
Forum: E11v2/E8
Topic: thermo switching
Replies: 4
Views: 159

Re: thermo switching

Not on an E11. You could use a second output and a relay controlled over RPM to control the switching of the main relay. Complicated, but it will solve it.

Go to advanced search