Search found 200 matches

by HaltechAdam
Wed Sep 19, 2018 11:07 pm
Forum: Elite Software Programmer (ESP)
Topic: No help file with the new ESP 2.00.32
Replies: 5
Views: 181

Re: No help file with the new ESP 2.00.32

Should be fixed now
by HaltechAdam
Wed Sep 19, 2018 11:03 pm
Forum: Elite Series
Topic: Sensors reading incorrectly HELP
Replies: 1
Views: 12

Re: Sensors reading incorrectly HELP

Temp sensors require a pull up avi6 does not have an internal pullup you will need to either fit an external pull up ( 1K resistor to 5v) or change inputs. The ford cylinder head temperature sensor calibration is a calibration setup specifically for the Pro plugin which uses a 10K internal pullup. I...
by HaltechAdam
Fri Aug 24, 2018 3:48 pm
Forum: Elite Series
Topic: New 2.27 Firmware / 2.00.32 Software Release
Replies: 2
Views: 220

New 2.27 Firmware / 2.00.32 Software Release

Now Available via ESP online

Software also available here 2.00.32 Software Download

Thanks for your support :D
by HaltechAdam
Fri Aug 24, 2018 2:47 pm
Forum: Elite Software Programmer (ESP)
Topic: Input filtering - Wasn't this supposed to be added a while back?
Replies: 7
Views: 278

Re: Input filtering - Wasn't this supposed to be added a while back?

2.27 Available now via ESP online or with the new software package
ESP 2.00.32
by HaltechAdam
Tue Aug 21, 2018 2:50 pm
Forum: Elite Software Programmer (ESP)
Topic: Input filtering - Wasn't this supposed to be added a while back?
Replies: 7
Views: 278

Re: Input filtering - Wasn't this supposed to be added a while back?

2.27 Release due very soon will include filtering to the Oil Temp Sensor

(v 2.27) Oil Temperature sensor is now filtered.
by HaltechAdam
Sun Jul 01, 2018 7:55 pm
Forum: Elite Series
Topic: Basic Harness for Elite 1500
Replies: 2
Views: 180

Re: Basic Harness for Elite 1500

Yes the basic harnesses supplied with the 1500's are 2500 harnesses.
The extra wires available in the harness are not useable on a 1500 and should be removed or insulated and isolated.
by HaltechAdam
Tue Apr 24, 2018 4:00 pm
Forum: Elite Software Programmer (ESP)
Topic: RX7 FD3S-S6 Basemap
Replies: 6
Views: 622

Re: RX7 FD3S-S6 Basemap

Elite Series Plug’n’Play Adaptors

https://www.haltech.com/downloads-2/spe ... artwiring/
by HaltechAdam
Sun Mar 04, 2018 8:44 pm
Forum: Elite Series
Topic: Need help with first start
Replies: 3
Views: 505

Re: Need help with first start

Trigger and Home jumpers on PCB may not have been changed , check they are configured as per the quick start guide.
http://files.haltech.com/downloads/Elit ... ide_v2.pdf
by HaltechAdam
Mon Feb 26, 2018 4:20 pm
Forum: Elite Series
Topic: Exposed wires in Premium Harness
Replies: 1
Views: 393

Re: Exposed wires in Premium Harness

Yes normal, they are the shields for the shielded cables ( DPI/SPI's)
by HaltechAdam
Thu Nov 16, 2017 10:12 pm
Forum: Elite Series
Topic: sample map for supra 2jzgte
Replies: 9
Views: 1068

Re: sample map for supra 2jzgte

your best off sending it through to Matt, he will work it out. Cheers
by HaltechAdam
Wed Nov 15, 2017 10:59 pm
Forum: Elite Series
Topic: sample map for supra 2jzgte
Replies: 9
Views: 1068

Re: sample map for supra 2jzgte

It will affect your trigger and Home, It depends on the wiring of your sensors. Ground reference is required if one side of your sensor pickup is grounded to the engine. It is disabled if both sides of the reluctor sensor are wired back to the ECU respective Trigger or home + and - locations. Your p...
by HaltechAdam
Wed Nov 15, 2017 9:32 am
Forum: Elite Series
Topic: sample map for supra 2jzgte
Replies: 9
Views: 1068

Re: sample map for supra 2jzgte

Those setting are greyed out and not being used. So your map is the same apart from the TDC offset.
Your TDC offset needs to be confirmed on your vehicle with a timing light.
by HaltechAdam
Thu Jun 29, 2017 4:40 pm
Forum: Elite Series
Topic: Can Elite 2500 DPO drive a 87-93 Mustang tachometer
Replies: 2
Views: 723

Re: Can Elite 2500 DPO drive a 87-93 Mustang tachometer

this simple circuit will probably work for your application, you just need an old relay
http://www.haltech.com/wp-content/uploa ... utput1.pdf

Go to advanced search