Search found 44 matches

by Spadam9
Mon Dec 25, 2017 11:26 am
Forum: Elite Series
Topic: 2500 elite into wrx hatch 2010
Replies: 17
Views: 1714

Re: 2500 elite into wrx hatch 2010

Good on you on your Subie dreams I have a MY13 hatch and have been tinkering with a haltech E2500 for about 2 years now. I have found it to be a great ECU easy to learn to use and tune compared to flashing the stock ecu. Its better running a Haltech for its spirited driving feel and safety of your m...
by Spadam9
Thu Oct 12, 2017 11:22 am
Forum: Elite Software Programmer (ESP)
Topic: Low PW Compensation
Replies: 13
Views: 2546

Re: Low PW Compensation

had an update, no LPW tables, next one hopefully?
by Spadam9
Thu Oct 12, 2017 11:19 am
Forum: Elite Series
Topic: DBW Cruise Control
Replies: 15
Views: 7055

Re: DBW Cruise Control

Cruise control!!! yes please. bumpety bump.
by Spadam9
Thu Oct 12, 2017 10:57 am
Forum: Elite Series
Topic: Transient Throttle weird
Replies: 25
Views: 2833

Re: Transient Throttle weird

What are your settings for detection time / dead band? I find that having 0%/sec load rate dead band and a 1ms detection time helps, I also use a 80%/sec2 load acceleration dead band. To offset false trips run a I run low levels dis-enrichment with a 0%/sec load rate dead band and a 0%/sec2 load dec...
by Spadam9
Tue Oct 03, 2017 8:10 am
Forum: Elite Series
Topic: boost control long term
Replies: 4
Views: 700

Re: boost control long term

More info might help eg. screen shots of settings? Table set up?
by Spadam9
Sun Jul 23, 2017 11:40 am
Forum: Elite Software Programmer (ESP)
Topic: Low PW Compensation
Replies: 13
Views: 2546

Re: Low PW Compensation

Here are the sheet you are talking about: http://help.injectordynamics.com/support/solutions/articles/4000075013-haltech These sheets still have PW not including dead time as Matt was saying. To include dead time (DT) I made these tables for the id1000 and id1300 for each injector. It by no means is...
by Spadam9
Sun Jun 18, 2017 10:26 am
Forum: Elite Software Programmer (ESP)
Topic: Low PW Compensation
Replies: 13
Views: 2546

Re: Low PW Compensation

I have an EJ257 with id 1300 injectors so do get in to the low pulse width zone in normal driving even on e85. I mapped mine with the individual cylinder generic fuel comps and the ID provided data. It has definitely made the car drive so much smoother at light load high rpm and idle smoother (more ...
by Spadam9
Mon Mar 20, 2017 2:30 pm
Forum: Elite Series
Topic: P1349 Real Time Clock DTC
Replies: 6
Views: 2644

Re: P1349 Real Time Clock DTC

I ended up calling Haltech as no love here and through Matts great help he looked at the two RTC channels and found that the battery is flat but the clock its self is fine. I hope this helps anyone in the future with a flat battery.
by Spadam9
Mon Mar 13, 2017 3:22 pm
Forum: Elite Software Programmer (ESP)
Topic: ESP 2.00.24 Displays Dimmed
Replies: 16
Views: 3524

Re: ESP 2.00.24 Displays Dimmed

I had it dim once too on new ESP, thanks for the post I was wondering.
by Spadam9
Sun Mar 12, 2017 9:48 am
Forum: Elite Series
Topic: P1349 Real Time Clock DTC
Replies: 6
Views: 2644

Re: P1349 Real Time Clock DTC

The code seems to be thrown on cold start, (possibly due to slightly more cranking time on e85). Then when i re hot start the car later the same day the code does not get thrown again.

As I asked previously anyone else with this code on the two most recent firmware updates?
by Spadam9
Sun Mar 12, 2017 9:42 am
Forum: Elite Series
Topic: missfire detect
Replies: 1
Views: 535

Re: missfire detect

bump, this would be good!!
by Spadam9
Sat Mar 11, 2017 4:27 pm
Forum: Elite Series
Topic: Knock setup (spectrogram)
Replies: 3
Views: 4939

Re: Knock setup (spectrogram)

I guess most of us don't know either, I have noticed it picks up random noise well too. I get knock on decel if I set it too low at low load points (which doesn't pick up knock noise at 20+psi of boost at same threshold level). I have used what Haltech had for their stock map setting for my car (WRX...
by Spadam9
Sun Feb 12, 2017 3:31 pm
Forum: Elite Series
Topic: Subaru wrx/Trigger errors/Avcs wiring
Replies: 4
Views: 960

Re: Subaru wrx/Trigger errors/Avcs wiring

I once didn't quite push my engine loom connector all the way in and had similar errors (the latch was even clipped down). Go over all basic things like this especially grounds. You should activate cam control and just set target to 0 in the table. Here are my trigger settings voltage mins and cam w...
by Spadam9
Sun Feb 12, 2017 3:06 pm
Forum: Elite Series
Topic: P1349 Real Time Clock DTC
Replies: 6
Views: 2644

Re: P1349 Real Time Clock DTC

I have just started getting the P1349 DTC after updating to firmware 2.21.00. Has any one else had this start to occur or is there something wrong with my ECU?
by Spadam9
Fri Jan 13, 2017 10:35 am
Forum: Elite Series
Topic: How to use OEM CAN input/output
Replies: 9
Views: 1666

Re: How to use OEM CAN input/output

Just do some franken wiring like I did and have your mates call your suby a birds nest. Plug in loom pleaaaaasee!!! :wink:

Lol

Go to advanced search