Search found 18 matches

by LotusEsprit1000
Wed Oct 10, 2018 9:41 pm
Forum: Elite Series
Topic: 10 Amp mini relay for EMS?
Replies: 1
Views: 61

10 Amp mini relay for EMS?

Is it a bad idea to use a 10 amp for the EMS? Do I neeed to run something bigger?
by LotusEsprit1000
Wed Oct 10, 2018 9:38 pm
Forum: Elite Series
Topic: Coils a few questions.
Replies: 3
Views: 87

Re: Coils a few questions.

Thanks brother.

I think LS coils are a bit different from the Audi 115 coils. AKA R8 coils.

If I have trouble Ill do as you suggested.
by LotusEsprit1000
Wed Oct 10, 2018 1:35 pm
Forum: Elite Software Programmer (ESP)
Topic: Switching a ground output to posative? Coils
Replies: 2
Views: 101

NO NEED!

THERE IS NO NEED TO DO THIS ON THE R8 coil or any known coil! Also Edge for the R8/ audi 4 wire red top that comes on mose post 03 engines is falling (<---- Not confirmed but 99% chance.) The ground signal will come after the pin goes high. High = charge low = fire. There is nothing that needs to c...
by LotusEsprit1000
Wed Oct 10, 2018 1:29 pm
Forum: Elite Series
Topic: Coils a few questions.
Replies: 3
Views: 87

Thanks LANCE!

Answered by LANCE. Coils are known as the R8 coild ( I found out after digging. ) This is the red top audi 4 pin. Pins = 1 hot. 2.ground 3 ECU... Haltech throws what the coil needs. Lance gave an explination that would fill a textbook page and for the avrage tuner it is not needed. I might put this ...
by LotusEsprit1000
Tue Oct 09, 2018 3:42 am
Forum: Elite Series
Topic: Can I connect to ESP out of the box?
Replies: 1
Views: 74

Can I connect to ESP out of the box?

I have my elite and harness but I was wondering while my car parts are not here and I am building my breakout looms. Can I connect the usb to the haltech and load up what I have set in ESP? I have set up almost everything I need to check timing and do my first start attempt. My Basic harness and ecu...
by LotusEsprit1000
Tue Oct 09, 2018 2:01 am
Forum: Elite Software Programmer (ESP)
Topic: Switching a ground output to posative? Coils
Replies: 2
Views: 101

Switching a ground output to posative? Coils

This is related to another post. I have a coil on plug system that needs to be fed posative from the ECU nopt ground. How do I switch this?
I am using PN 06E 905 115 E AKA audi red top 115 coil.
by LotusEsprit1000
Tue Oct 09, 2018 12:15 am
Forum: Elite Series
Topic: Coils a few questions.
Replies: 3
Views: 87

Coils a few questions.

Allright I have some audi/ VW 4 wire coils. Obviously I dont need a seperate ignition module. The issue is I know some things but I have a major issue. I am building the breakout looms and the factory colors are. 1 red w yelllow stripe = relayed 12v + I know as I pulled apart the loom. 2 brown = Gro...
by LotusEsprit1000
Sun Oct 07, 2018 3:38 am
Forum: Elite Series
Topic: Wiring in my 1500. Relay and fuse questions.
Replies: 2
Views: 69

Re: Wiring in my 1500. Relay and fuse questions.

Thanks, I got the answers for the relay a while ago. Also its in the manual... Clearer on the black one. I have my injection breakout done but now I am at the point where I think I am going to get a fast disconnect for the Hot side of the injector loom. Saves me a lot of PITA when going to remove th...
by LotusEsprit1000
Sat Oct 06, 2018 9:48 pm
Forum: Elite Series
Topic: Wiring in my 1500. Relay and fuse questions.
Replies: 2
Views: 69

Wiring in my 1500. Relay and fuse questions.

I am doing this for the first time and documenting it so there are no more questions about this process. I can also share the map I am building of the wiring. I do believe any idiot with a pad pen voltmeter and heat shrink can build a harness. For relay 1 : I have a 10 amp fuse feeding pins 30 and 8...
by LotusEsprit1000
Sat Oct 06, 2018 5:46 pm
Forum: Elite Series
Topic: Wiring in my 1500. Relay and fuse questions.
Replies: 1
Views: 53

Wiring in my 1500. Relay and fuse questions.

I am doing this for the first time and documenting it so there are no more questions about this process. I can also share the map I am building of the wiring. I do believe any idiot with a pad pen voltmeter and heat shrink can build a harness. For relay 1 : I have a 10 amp fuse feeding pins 30 and 8...
by LotusEsprit1000
Thu Oct 04, 2018 3:18 am
Forum: Off-Topic
Topic: Yall need to take some advice and delete this after.
Replies: 0
Views: 50

Yall need to take some advice and delete this after.

I think most people here know who I am. Not that I am a special guy I might not even be a good customer. Not that I try to be a bad one. But this is a bit incompetent on Haltech's end. Given I have been planning this for a long time and I am ready to promote a product I have never used before having...
by LotusEsprit1000
Sat Sep 29, 2018 11:10 am
Forum: Elite Series
Topic: Quick Tip: Something to be aware of when NOT using Auto VE air temp compensation.
Replies: 6
Views: 272

Re: Quick Tip: Something to be aware of when NOT using Auto VE air temp compensation.

New guy question. If I am running a MAT sensor do I need this? I have not gotten the software downloaded yet. I am going to tonight after work.
by LotusEsprit1000
Sat Sep 29, 2018 11:07 am
Forum: Elite Series
Topic: Elite 1500. Just ordered have a few questions.
Replies: 3
Views: 147

Re: Elite 1500. Just ordered have a few questions.

Thanks both of you. It helps HEAPS! I will get the software today. I looked in one of my bins O audi parts and looked in my lotus stuff and I have. 4x Audi 4 pin stick coils. I have more actually. 1x 4 wire narrow band O2... For now until I can afford the controller. I have a 5 wire wideband on the ...
by LotusEsprit1000
Sun Sep 23, 2018 9:15 am
Forum: Elite Series
Topic: Elite 1500. Just ordered have a few questions.
Replies: 3
Views: 147

Elite 1500. Just ordered have a few questions.

I have read through what I could find and have watched the Haltech programs. But I forget things and this is my first install of an ECU Now I just ordered the 1500 today over the 1000 because it has better engine protection and mapping capibilities than the latter if I am not mistaken. Can I downloa...
by LotusEsprit1000
Sat Aug 11, 2018 4:46 am
Forum: Elite Series
Topic: Typical wire in install / guide?
Replies: 1
Views: 168

Typical wire in install / guide?

Is there a typical wire in install guide/ rundown for the Elite.... I have read everything and think I understand but I mean I would think that would be a thing by now. And if there isnt hey Haltech Ill be glad to make a series and guide on it. I think its important for people like me who are not pr...

Go to advanced search