Motronic wheel

jdzumwalt

Motronic wheel

Postby jdzumwalt » Wed Apr 18, 2007 11:56 am

RPMs pretty jumpy.
At idle it stay mostly smooth but as the motor comes up to rpm it starts jumping to 10,000 rpm and back firing.

Motronic wheel is set
filter 2
gain 4

60-2 on the crank 7.75"
I'm using the 1/2 sensor

thanks guys

Scott1600

.

Postby Scott1600 » Thu Apr 19, 2007 4:42 pm

i cant see any question, but i would start at adjusting the sensor air gap, reversing the polarity of the sensor and adjusting the gain / trigger edge.


Return to “Technical Support (from EZboard)”

Who is online

Users browsing this forum: No registered users and 3 guests