Inverting Map Axis

BlackBirdSR71
Posts: 23
Joined: Tue Jul 14, 2015 3:41 am

Inverting Map Axis

Postby BlackBirdSR71 » Tue Oct 03, 2017 4:09 pm

Using Halwin 1.71 on an E11. Is there any way to invert the MAP Axis. The Fuel and Spark RPM Axis on the Y axis start with 0 RPM at the top and high RPM at the bottom. I found this counter intuitive when building a Map. Can the Axis Values be inverted in the software, or even in the .INI configuration files? I prefer to have low RPM's at bottom of scale.

Would also be nice to have the X Axis at the bottom of the chart instead of the Top. Any way to change this. I don't mind working with .INI configuration files if it needs to be changed there.

Is it possible to change the KPA MAP scaling so that it uses Gauge Absolute Pressure instead ( sea level = 100 Kpa ) instead of Scientific Absolute Pressure ( Sea level = approx 0 Kpa )TIA

Richard

User avatar
HaltechMatthew
Haltech Staff
Posts: 2251
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: Inverting Map Axis

Postby HaltechMatthew » Thu Oct 05, 2017 3:21 pm

Short answer. No. :D


Return to “E11v2/E8”

Who is online

Users browsing this forum: No registered users and 5 guests