E11V2 RX8

User avatar
vlad_rally
Posts: 50
Joined: Tue Jan 26, 2016 8:37 am

E11V2 RX8

Postby vlad_rally » Mon Oct 31, 2016 7:04 pm

So, i will be installing my old E11 on a hillclimb RX8 that we'r building for next year. I just have a couple of wiring questions to make it clear:
1-Injectors 1 to 6 are going to injectors 1 to 6?
2-Ignition outputs, witch are the primary and witch are the trailing outputs?
3-will the oem trigger wheel work? will a 36-1 wheel work?
4-oil metering pump, how do i wire it ? like a simple step by step motor?
5-the engine will be a full bridge ported one, witch of the valves on the intake do still need to work (for full race application)
6-if my up-mentioned are wrong, witch is the simplest way to wire this ecu on this engine (E11V2 on 13B Renesis)
Cheers

User avatar
HaltechMatthew
Haltech Staff
Posts: 2385
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: E11V2 RX8

Postby HaltechMatthew » Wed Nov 02, 2016 10:39 am

Just NO. Dont use an E11.

1. It only does 2x stages so 3x stages wont work properly
2. Ign1-4 are L1,L2,T1,T2
3. No and No.
4. Instructions are on our website. Accessories Guides and Wiring and there is a stepper motor guide.
5. Most of it wont work. H-bridge driven.
6. No instructions sorry because it wont work.

User avatar
vlad_rally
Posts: 50
Joined: Tue Jan 26, 2016 8:37 am

Re: E11V2 RX8

Postby vlad_rally » Thu Nov 03, 2016 5:18 am

Ok, so i'l leave all the intake ports valves opened, what trigger type or wheel do i need for it to work? injectors set as multipoint injection ? all at once injecting...Sorry Matt, this is my first rotary...i'm just trying to be extra careful and get it right the first time.

User avatar
HaltechMatthew
Haltech Staff
Posts: 2385
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: E11V2 RX8

Postby HaltechMatthew » Thu Nov 03, 2016 9:35 am

For this old ECU only a 12x and 1x trigger will work. Same as all old rotary models used. Honestly, I would not be fitting this ECU especially if this is your first ever rotary.

User avatar
vlad_rally
Posts: 50
Joined: Tue Jan 26, 2016 8:37 am

Re: E11V2 RX8

Postby vlad_rally » Thu Nov 03, 2016 5:39 pm

ok...then platinum or elite ? note that i have to keep a tight budget, because it's going to be one of our official cars next year, and i'm making huge discounts for the preparation of it. :)
By the way, i have become a official Haltech dealer for Romania :D

PS: i could not find a elite 550 and 750 base map, can you send me one? To see what options i have in it (Rally ALS, Rot Idle, Sfety features, etc) Because, as you said, these elite ecu's would be perfect, for the price they have. But first, i need to see what their all about. Thanks.


Return to “E11v2/E8”

Who is online

Users browsing this forum: No registered users and 4 guests