E8 trigger input question

Posts: 1
Joined: Fri Dec 30, 2016 11:18 am

E8 trigger input question

Postby bodex666 » Fri Dec 30, 2016 11:24 am

Hi all,

Just wiring in a E8 to a fuel injected VW conversion and need some help with timing input.

I originally fitted a dyna 2000 stand alone ignition system. This ignition kit has a tach signal out wire. Is it possible to use this lead for the trigger signal input into the E8 or do I need to wire the whole 4 wire trigger input into the crank sensor and get rid of the Dyna 2000?

I've tried connecting just the yellow trigger wire to the tach out and spin the engine over but I get rpm zero on the computer feed.

Any help would be great.

User avatar
Haltech Staff
Posts: 2566
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia

Re: E8 trigger input question

Postby HaltechMatthew » Wed Jan 04, 2017 4:34 pm

I woudl be removing the dyna 2000 and go with a more modern and conventional setup. What trigger does it run?

Return to “E11v2/E8”

Who is online

Users browsing this forum: No registered users and 7 guests