E11v2 with msd dis 4 plus

turbofort
Posts: 1
Joined: Sun Jan 28, 2018 10:03 am

E11v2 with msd dis 4 plus

Postby turbofort » Sun Jan 28, 2018 10:10 am

Hi guys,

How i connect the e11v2 with a msd dis 4 plus using individual msd coils in a V6 engine? (300zx Vg30dett)

User avatar
HaltechMatthew
Haltech Staff
Posts: 2483
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: E11v2 with msd dis 4 plus

Postby HaltechMatthew » Tue Feb 06, 2018 2:48 pm

Ignition Output 1 through 6 goes to Cyl 1 through 6. Constant Charge, Rising 3.0ms.

BlackBirdSR71
Posts: 30
Joined: Tue Jul 14, 2015 3:41 am

Re: E11v2 with msd dis 4 plus

Postby BlackBirdSR71 » Mon Feb 19, 2018 12:05 pm

HaltechMatthew wrote:Ignition Output 1 through 6 goes to Cyl 1 through 6. Constant Charge, Rising 3.0ms.


Yes. Found out the hard way on an Audi that the MSD DIS 4 ( and 4 Plus ) will not operate correctly with a Dwell rate of less than 2.5ms . 3.0ms should be ideal.

2.5ms dwell limit is not documented anywhere in MSD site or instructions, but finally found a helpful MSD Tech on Yellow Bullet forum that gave me this info.

User avatar
HaltechMatthew
Haltech Staff
Posts: 2483
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: E11v2 with msd dis 4 plus

Postby HaltechMatthew » Wed Feb 21, 2018 3:47 pm

Correct. Something to do with a break time, but it is not documented. 3.0ms works fine.


Return to “E11v2/E8”

Who is online

Users browsing this forum: No registered users and 7 guests