E11v2 with msd dis 4 plus

Postby **turbofort** » Sun Jan 28, 2018 10:10 am

Hi guys,

How i connect the e11v2 with a msd dis 4 plus using individual msd coils in a V6 engine? (300zx Vg30dett)

Postby **HaltechMatthew** » Tue Feb 06, 2018 2:48 pm

Ignition Output 1 through 6 goes to Cyl 1 through 6. Constant Charge, Rising 3.0ms.

Postby **BlackBirdSR71** » Mon Feb 19, 2018 12:05 pm

HaltechMatthew wrote:Ignition Output 1 through 6 goes to Cyl 1 through 6. Constant Charge, Rising 3.0ms.

Yes. Found out the hard way on an Audi that the MSD DIS 4 ( and 4 Plus ) will not operate correctly with a Dwell rate of less than 2.5ms . 3.0ms should be ideal.

2.5ms dwell limit is not documented anywhere in MSD site or instructions, but finally found a helpful MSD Tech on Yellow Bullet forum that gave me this info.

Postby **HaltechMatthew** » Wed Feb 21, 2018 3:47 pm

Correct. Something to do with a break time, but it is not documented. 3.0ms works fine.