Page 1 of 1

E8 with LPG?CNG

Posted: Fri Nov 09, 2018 5:16 am
by TurboCorbeau
Good day. I am looking to undergo a new project. It will be a 2.0L Turbocharged 4 cylinder, with a dedicated CNG sequential injection system. Everything petrol related will be removed (petrol injectors, fuel pumps, fuel tank, ecu etc) as the car will be CNG only. For this project, I would like to use an E8 I have from another project, however, I am not too certain if it will be able to drive my injectors.

The injector setup on the E8 has peak and hold settings of 2/0.5 3/0.8 5/1.2 Amps. The CNG injectors I am looking at are spec
1.9 Ohms
Peak Current 4 Amps
Hold Current 2 Amps.

I am thinking to use the nearest setting which is 5 Peak 1.2 Hold, but this not an exact match to the injectors. Question is can these injectors work on the E8 ECU? Or will I run into issues?

I know the elite series would be able to handle these injectors without an issue, but would really prefer if I can hold out on an ECU purchase, at least for now.

Thanks in advance.

Re: E8 with LPG?CNG

Posted: Fri Nov 09, 2018 1:45 pm
by HaltechMatthew
It wont hold at 2A, so you will have problems with stable injection. Always an issue with gas injectors!

Re: E8 with LPG?CNG

Posted: Sat Nov 10, 2018 12:56 pm
by TurboCorbeau
Thanks. Much appreciated