Mazda Premacy with FS-DE engine and FN4A-EL auto tranny.

Mr_Mania
Posts: 4
Joined: Tue Dec 09, 2008 2:25 am
Contact:

Mazda Premacy with FS-DE engine and FN4A-EL auto tranny.

Postby Mr_Mania » Tue Dec 09, 2008 1:53 pm

Hi there, i would like to ask for help with platinum interceptor ecu. could this piggyback ecu install on my ride? Thank you.

Mr_Mania
Posts: 4
Joined: Tue Dec 09, 2008 2:25 am
Contact:

Re: Mazda Premacy with FS-DE engine and FN4A-EL auto tranny.

Postby Mr_Mania » Thu Dec 11, 2008 12:36 pm

Did i missed out information here?

User avatar
Claudio
Posts: 1188
Joined: Wed Sep 26, 2007 10:44 am
Location: Santo Domingo, Dominican Republic
Contact:

Re: Mazda Premacy with FS-DE engine and FN4A-EL auto tranny.

Postby Claudio » Sun Dec 14, 2008 9:41 am

We need information on this vehicle, do you have pics? what kind of crank/cam trigger does it have, model year, are you turbo'ing it or is it NA?

I personally have never heard of this vehicle so you might be in for some difficulty to get the miniceptor on it if there's no info.
Claudio
tuningtechnology@gmail.com
Independant Haltech Sales & Tech Support

Mr_Mania
Posts: 4
Joined: Tue Dec 09, 2008 2:25 am
Contact:

Re: Mazda Premacy with FS-DE engine and FN4A-EL auto tranny.

Postby Mr_Mania » Sat Dec 20, 2008 3:06 am

The mazda Premacy are a same base chasis with Mazda Protege which are using FS-DE engine.

2.0 liter engine:
Displacement 1991cc
Cylinders 4
Valvetrain DOHC 16 valve, direct shim over tappet actuation, timing belt
Horsepower 130hp @ 6000r/min (SAE net)
Torque 135lbs/ft @ 4000r/min (SAE net)
Bore & Stroke 83mm x 92mm
Compression Ratio 9.1:1
Induction Type Natural
Ignition type distributor-less coil pack
Fuel system Multipoint EFI

it has crank sensor n cam sensor but not sure of the trigger. can help me how to finding the trigger? is it in frequency or voltage?
Attachments
DSC_0007m.JPG
FS-DE engine

User avatar
Claudio
Posts: 1188
Joined: Wed Sep 26, 2007 10:44 am
Location: Santo Domingo, Dominican Republic
Contact:

Re: Mazda Premacy with FS-DE engine and FN4A-EL auto tranny.

Postby Claudio » Sat Dec 27, 2008 5:45 am

You have to either find the info in a service manual or look at it and tell us what type of trigger wheel/patern it is. Mazda usually uses 36-1 ford style on the crank and then something on the cam, or if its a more modern motor, like the ones from the mazda 3/6/cx-7 it will have a modified version of this, 36-6, with 3 windows of 2 missing teeth each, similar to subaru.

And of course, then there's the matter of what type of sensor it is, hall effect or reluctor?
Claudio
tuningtechnology@gmail.com
Independant Haltech Sales & Tech Support


Return to “Interceptor”

Who is online

Users browsing this forum: No registered users and 1 guest