Problems with a old E6M-8

User avatar
Flappes
Posts: 12
Joined: Mon Mar 02, 2009 2:58 am
Location: Saarland, Germany

Problems with a old E6M-8

Postby Flappes » Mon Jul 03, 2017 10:52 pm

Hello,

i think my ecu is not okay.
I want to give it to an electrical engineer to check it.
Do you have any wiring diagramms of this old ecu, and is it possible to send this per mail ?

Its not profitable for me to send this ecu from Germany to Australia for check or reparation.
therefore the ecu is to old to invest a lot of money.

greets Christian

User avatar
HaltechMatthew
Haltech Staff
Posts: 2452
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: Problems with a old E6M-8

Postby HaltechMatthew » Tue Jul 04, 2017 2:47 pm

Time for the bin I am sorry to say. The ECU is too old to repair with no parts available and we have no support for this very rare and very old ECU model.

User avatar
Flappes
Posts: 12
Joined: Mon Mar 02, 2009 2:58 am
Location: Saarland, Germany

Re: Problems with a old E6M-8

Postby Flappes » Mon Jul 17, 2017 5:56 pm

I can get an E6K for a Test.
Is its right that the E6K is the same than the E6M ?
Can i use my E6M Harness ?
I only must load my Saved Map to the E6K ?

User avatar
HaltechMatthew
Haltech Staff
Posts: 2452
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: Problems with a old E6M-8

Postby HaltechMatthew » Tue Jul 18, 2017 2:38 pm

They are the same ECU except missing the PWMs from my memory in the 1990's. I think even the software may work between them.

User avatar
Flappes
Posts: 12
Joined: Mon Mar 02, 2009 2:58 am
Location: Saarland, Germany

Re: Problems with a old E6M-8

Postby Flappes » Wed Jul 19, 2017 5:38 pm

Thanks.

This is the only Difference in the Wirring diagramm i readed.


Return to “Old Engine Management Systems”

Who is online

Users browsing this forum: No registered users and 1 guest