Haltech E6K + idle

WidebodyWoody
Posts: 18
Joined: Tue Jul 04, 2017 12:50 am

Haltech E6K + idle

Postby WidebodyWoody » Mon Aug 28, 2017 11:20 am

Hey guys

I am trying to run a valve that opens up to help with cold idle on my car. The valve is a 12VDC valve. What would I wire this up to on my haltech in order to program this to turn on below a certain temp and turn off above it?

Using something similar to this: http://files.haltech.com/downloads/acce ... ns_web.pdf

http://www.haltech.com/wp-content/uploa ... omRevF.pdf

Thanks

User avatar
HaltechMatthew
Haltech Staff
Posts: 2452
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: Haltech E6K + idle

Postby HaltechMatthew » Mon Aug 28, 2017 12:46 pm

Wire it to switched 12V+ and to a spare PWM. If this is a normal idle valve then set it as BAC and start tuning.

WidebodyWoody
Posts: 18
Joined: Tue Jul 04, 2017 12:50 am

Re: Haltech E6K + idle

Postby WidebodyWoody » Mon Aug 28, 2017 5:31 pm

Thank you for your help. I'll wire it up to that.


Return to “Old Engine Management Systems”

Who is online

Users browsing this forum: No registered users and 3 guests