Wiring PS2000 to a msd 6a and ice coil has anyone done this?

lindsaytb83
Posts: 2
Joined: Sun Aug 23, 2015 3:03 pm

Wiring PS2000 to a msd 6a and ice coil has anyone done this?

Postby lindsaytb83 » Fri Jul 01, 2016 6:46 pm

Hi all,

just having a few issues with starting my car after a complete rebuild and upgrade. I have upgraded to a Platinum Sport 2000, MSD 6A and a ICE coil.
I have the coil connected to the msd but unsure if the ecu needs to be connected? if so is it the yellow and red Ignition wire that is used? and is this connected to the msd or directly to the positive side of the coil?

thanks in advance

lindsay

User avatar
blakebonkofsky
Posts: 225
Joined: Sun Aug 02, 2015 2:58 am

Re: Wiring PS2000 to a msd 6a and ice coil has anyone done this?

Postby blakebonkofsky » Sat Jul 02, 2016 2:05 pm

The only wires to the coil should be directly from the MSD 6A. The PS2000 will connect to the white wire of the MSD box, from DPO5 / IGN 1 (Yellow/Black).

For the Ignition setup within the PS2000, you want to select Constant Duty, 50%, and Rising Edge trigger.

lindsaytb83
Posts: 2
Joined: Sun Aug 23, 2015 3:03 pm

Re: Wiring PS2000 to a msd 6a and ice coil has anyone done this?

Postby lindsaytb83 » Sun Jul 03, 2016 6:55 pm

Thanks for your help blakebonkofsky.
i followed your advice and checked everything i did have the wiring right after all and made changes to the program but still no luck kicking it over. im wondering tho as i changed from using the standard VL dizzy CAS and installed the Mitsubishi item used in the R31 skylines but i selected the nissan optical in the program wondering if i need to change this.

lindsay


Return to “Tuning Discussions”

Who is online

Users browsing this forum: No registered users and 4 guests