Advanced injector characterisation

GRaF_ST205
Posts: 216
Joined: Wed Aug 12, 2009 5:40 pm
Location: RUS, MSK
Contact:

Advanced injector characterisation

Postby GRaF_ST205 » Fri Dec 19, 2014 6:26 am

Should we expect in PS series the following tables:
Injector flow rate vs pulse width
injector flow rate vs fuel pressure
Injector dead time vs fuel pressure
etc?
I have a 4 cylinder engine with 1000cc injectors and a 2 mode fuel pump, so I have no idle and funny values in one half of base fuelmap :?
JDM ST205 PS500
UZX81 project

User avatar
HaltechMatthew
Haltech Staff
Posts: 2452
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: Advanced injector characterisation

Postby HaltechMatthew » Fri Dec 19, 2014 10:29 am

Not going to happen sorry. Pro and Elite series only will do this.

GRaF_ST205
Posts: 216
Joined: Wed Aug 12, 2009 5:40 pm
Location: RUS, MSK
Contact:

Re: Advanced injector characterisation

Postby GRaF_ST205 » Fri Dec 19, 2014 7:14 pm

Elite also has no 3d dead time table, only depending on voltage or pressure drop across the injector :x
JDM ST205 PS500
UZX81 project

User avatar
HaltechMatthew
Haltech Staff
Posts: 2452
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: Advanced injector characterisation

Postby HaltechMatthew » Mon Dec 22, 2014 3:17 pm

It is coming for the Elite. There are MANY things yet to come in firmware updates over the next few months.


Return to “Feature Requests”

Who is online

Users browsing this forum: No registered users and 1 guest