User define

aatsi_fin
Posts: 1
Joined: Sat Apr 16, 2016 3:57 am

User define

Postby aatsi_fin » Sat Apr 16, 2016 4:07 am

General would be nice to name inputs/outputs by user and define functions for those. example there is oil temp for input but no output for function for that so you can control examble fan for oil cooler.. That function would be very useful!" Clients be asking why Haltech cant do it and so meny others can....

JimKden
Posts: 352
Joined: Wed Jan 12, 2011 2:28 am

Re: User define

Postby JimKden » Sat Apr 16, 2016 8:14 am

The point of this post is you can do it, not why I am doing the below setup.

I didn't want to use the normal engine outlet waterjacket temperature for thermofan control.
I read a radiator out temperature on a SPI, named it Rad Out. Used my calibration curve for the sensor.
I control the radiator cooling fan on a DPO, named it Rad Fan. I created a table that one axis is the Rad Out temperature and a second axis of vehicle speed (I just elected to for my reasons). The fan is variable speed on a solid state relay and ramps speed as needed.

LMS_689
Posts: 1397
Joined: Thu Oct 18, 2007 6:30 am
Location: Floyds Knobs, IN USA
Contact:

Re: User define

Postby LMS_689 » Thu Apr 21, 2016 3:10 am

Elite can that already. Sport and Sprint can't. My guess is, don't expect those functions to be rolled out in the Sport and Sprint.
Haltech Parts and Accessories
Custom Harness Construction
http://www.lms-efi.com
chris@lms-efi.com
502-515-7482


Return to “Feature Requests”

Who is online

Users browsing this forum: No registered users and 1 guest