RB30E No start issue

Questions about the Platinum Sport series ECU settings or features? Ask here.
lachlanbuhmann
Posts: 3
Joined: Fri Feb 23, 2018 9:50 am

RB30E No start issue

Postby lachlanbuhmann » Fri Feb 23, 2018 10:03 am

Attempting to start my car (r31-rb30e) for the first time with the ps2000. I have injector pulse and spark, trigger and home are perfect, can smell fuel and spraying aerostart does nothing. Engine does fire while cranking but only when i have a noid light in inj-1 connector???? (wtf)

I have not yet to verified the timing but will do so when the battery is charged.
Any advice would be greatly appreciated.

User avatar
HaltechMatthew
Haltech Staff
Posts: 2452
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: RB30E No start issue

Postby HaltechMatthew » Fri Feb 23, 2018 12:32 pm

Attach your Map and more specs on the components you are using.

lachlanbuhmann
Posts: 3
Joined: Fri Feb 23, 2018 9:50 am

Re: RB30E No start issue

Postby lachlanbuhmann » Fri Feb 23, 2018 1:07 pm

Thanks for the reply Matt,

RB30E in R31, using standard coil, transistor and distributor, bosch (xspurt) 1000cc injectors, no afm, using tps as load sensor. (no turbo)

Have just checked timing while cranking with the plugs out, it was 3deg advanced, is now perfect. Battery is flat again...

Unsure of how you want me to attach my MAP to this reply?

Thankyou.

lachlanbuhmann
Posts: 3
Joined: Fri Feb 23, 2018 9:50 am

Re: RB30E No start issue

Postby lachlanbuhmann » Fri Feb 23, 2018 5:39 pm

Software was configured for 250cc injectors, forgot to re-set it to 1000ccs after my configuration was wiped when I first powered up the ecu.


Return to “Platinum Sport Series”

Who is online

Users browsing this forum: No registered users and 3 guests