Time has come to rewire my car in a most professional way and thus i got back to an old project I never completed. I have a rotrex supercharged which runs on its own oil so it has a separate oil circuit. I added a thermostatic switch set for 80° which is the oil temperature limit set from Rotrex. Since I could not have a specific function for rotrex, I came to the conlclusion I could use a DPI (my DSI is already used as Datalog activation through a switch) to call the "Generic Timer Switch" and use a DPO to light a led alarm light in the dash.
My thermostatic swich is wired to chassis ground, so first question is "can I wire my DPI to ground"? In the first place I wanted it to light a bulb in my dash, obviously I can rewire it too. Second question is "can I use a DPO to direcly light a 12v led alarm light or should i trigger a relay to light it?"
Questions about the Platinum Sport series ECU settings or features? Ask here.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 11 guests