I have been trying to set up the intercooler sprayer feature.
I have wired up DPO17 to "ground/trigger" the relay that is triggering the pump. To test my setup I set DPO17 to be a TPS Switch and this worked and triggered the pump.
When I set the DPO to Intercooler Spray Adv, and set the parameters as follows; (Using these as a test setup)
Min MAP: -29.2
Min TPS: 1%
Min RPM: 10
Min Coolant Temp: 1
Min Air Temp: 1
It does not switch the state of the DPO and does not trigger the pump.
Am I missing something with the sprayer setup?
Questions about the Platinum Sport series ECU settings or features? Ask here.
1 post • Page 1 of 1
Who is online
Users browsing this forum: Majestic-12 [Bot] and 4 guests