DPO 17 18 GROUND for aux methanol solenoids ????

Questions about the Platinum Pro Harness 350Z and R35? Ask here.
jimc1031
Posts: 14
Joined: Tue Apr 30, 2013 2:40 pm

DPO 17 18 GROUND for aux methanol solenoids ????

Postby jimc1031 » Sun Jun 15, 2014 6:29 am

We are wiring our methanol turbo dragster for cooling intake with aux solenoids. Do we use
DPO 17- 18.are these two outputs grounds ?? 8) 8)
THANKS JIMC

LMS_689
Posts: 1397
Joined: Thu Oct 18, 2007 6:30 am
Location: Floyds Knobs, IN USA
Contact:

Re: DPO 17 18 GROUND for aux methanol solenoids ????

Postby LMS_689 » Mon Jun 16, 2014 6:29 pm

Those should work well. They do pull to ground when active.
Haltech Parts and Accessories
Custom Harness Construction
http://www.lms-efi.com
[email protected]
502-515-7482

User avatar
Claudio
Posts: 1188
Joined: Wed Sep 26, 2007 10:44 am
Location: Santo Domingo, Dominican Republic
Contact:

Re: DPO 17 18 GROUND for aux methanol solenoids ????

Postby Claudio » Sun Aug 24, 2014 4:45 pm

Another thing worth mentioning is to consider when connecting additional injectors and solenoids, especially if they are low impedance, is to use the injector channels, as they will be influenced by the injector current setting in the fuel setup page and will help for what ever you run to properly be controlled by the haltech.
Claudio
[email protected]
Independant Haltech Sales & Tech Support


Return to “Platinum Pro Harness”

Who is online

Users browsing this forum: No registered users and 3 guests