Transient throttle

Questions about the Platinum Sprint series ECU settings or features? Ask here.
Berto24
Posts: 16
Joined: Fri May 06, 2016 9:52 pm

Transient throttle

Postby Berto24 » Tue Jun 07, 2016 6:59 am

I have a doubt about this feature, yesterday was checking my logs and saw that the AFR got a lean between gear changes. It was 13.02 AFR at 2.87psi ,4949rpm. In the software the transient throttle table consist of 1000,2000,3000,4000rpm respectively. So lets say for example If am in 2nd gear at 8500rpm and I change into 3rd and the rpms drop to lets say 4500rpm and stabbed the throttle again no enrichment will be triggered, am I correct to this point?

User avatar
Peterson
Posts: 101
Joined: Mon Aug 17, 2015 2:35 am

Re: Transient throttle

Postby Peterson » Tue Jun 07, 2016 2:01 pm

As far as I remember you can change the values at the table and also add or remove cells to suite your needs better.I will be later near at my laptop to confirm if you are not in a hurry.cheers.

User avatar
Peterson
Posts: 101
Joined: Mon Aug 17, 2015 2:35 am

Re: Transient throttle

Postby Peterson » Tue Jun 07, 2016 10:52 pm

Ok.If you go at transient throttle-enrich and press "table axis setup" you have maximum 4 cells at RPM and 4 cells at transient load source % to play with.You can't add more than 4 cells but you can change the values at that cells to suit your needs somehow better.

Berto24
Posts: 16
Joined: Fri May 06, 2016 9:52 pm

Re: Transient throttle

Postby Berto24 » Sun Jun 12, 2016 5:05 am

Peterson wrote:Ok.If you go at transient throttle-enrich and press "table axis setup" you have maximum 4 cells at RPM and 4 cells at transient load source % to play with.You can't add more than 4 cells but you can change the values at that cells to suit your needs somehow better.

Thanks man I will play with this and see how it goes :D

User avatar
Peterson
Posts: 101
Joined: Mon Aug 17, 2015 2:35 am

Re: Transient throttle

Postby Peterson » Sun Jun 12, 2016 8:01 pm

Cheers mate.Let us know how this turned up for you.


Return to “Platinum Sprint Series”

Who is online

Users browsing this forum: No registered users and 2 guests