Page 2 of 2

Re: How many Cylinders ?

Posted: Wed Aug 10, 2011 9:21 pm
by dale_che
yes to get it you must use the M&W box as we have tested for haltech..

you can see the white wire running into the box that is the only wire hooking the CDI to the ECU..

Image

we are running 8 of the bosch HEC715 coils,

this system works perfectly fine but yes adds a little extra cost for the ignition box.
im pretty sure motec and autronic use what they call a multiplex output which is a combination of 4 wires fired at different times to fire 8 cyl direct fire no a single wire.

i have no problems running V8's in wastespark which i run on my own race car using LS1 coils which so far have been fine at 1500hp or so, if we run out of spark ill switch to the M&W single wire and 8 CDI coils.

Re: How many Cylinders ?

Posted: Thu Aug 11, 2011 6:35 am
by Ignition
Motec uses a single wire, also to their IEX box for inductive systems.

Re: How many Cylinders ?

Posted: Wed Oct 19, 2011 2:41 pm
by CanadianR32
Platinum Pro Plug-In for Nissan Skyline R32 RB20DET, inline 6!

Re: How many Cylinders ?

Posted: Fri Jan 29, 2016 3:56 pm
by Peterson
Platinum Sprint 500 Nissan Pulsar N13 E15ET four cylinder.