elite 550 on SBC383 twin turbo

Questions about the Elite Series ECU's? Ask here.
victorgarage
Posts: 7
Joined: Sun Jun 25, 2017 2:59 am
Location: indonesia
Contact:

elite 550 on SBC383 twin turbo

Postby victorgarage » Sat Oct 07, 2017 4:16 pm

can anyone help me>
i have run this v8 with this setup:
60-2 crank wheel with VR sensor
8 granatelli extreme coils for LS
480cc high imp injectors
e strret cyl head
holley intake manifolds
edelbrock pro flo fuel rails
aeromotive FPR
BKR6EIX

i wired it wated spark with this setup
16
85
47
32

my FO is 18436572

i have run this engine with very hard tryng after several long cranking
have to keep foot on pedal to make it idle and run
hear sounds missfiring alot sometimes bang bang loud
cant rev beyond 4000rpm

have u guys here ever build with this setup
maybe can give me hints here and there...

meanwhile,.. my guess is the problem was on the trigger...
due to sometimes have trigger reference error on my daignostic table...
will try install Fast dual sync and try again...
but please do help me give advice

want to attach the datalog but seems cant


:(

User avatar
blakebonkofsky
Posts: 216
Joined: Sun Aug 02, 2015 2:58 am

Re: elite 550 on SBC383 twin turbo

Postby blakebonkofsky » Sun Oct 08, 2017 4:11 am

You need to .ZIP the calibration or log files when attaching them. Based on your info, it could be many things, but the log files will help a great deal. I would start by double checking your firing order, and to make sure your ignition timing is synced correctly.

victorgarage
Posts: 7
Joined: Sun Jun 25, 2017 2:59 am
Location: indonesia
Contact:

Re: elite 550 on SBC383 twin turbo

Postby victorgarage » Mon Nov 06, 2017 11:11 pm

problem solved..
i change the 60-2 trigger into FAST dual sync distributor
it runs very smoorth producing 400whp at 0.9bar..
need upgrade injectors and pump as my injectors are reaching 85% duty cycle


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 2 guests