Assembling ecu plugs

Questions about the Elite Series ECU's? Ask here.
Fraserjay88
Posts: 2
Joined: Mon Oct 23, 2017 3:41 pm

Assembling ecu plugs

Postby Fraserjay88 » Mon Oct 23, 2017 3:43 pm

I seem to be having a very hard time assembling these plugs, is there a trick to it im not aware of?

User avatar
blakebonkofsky
Posts: 216
Joined: Sun Aug 02, 2015 2:58 am

Re: Assembling ecu plugs

Postby blakebonkofsky » Mon Oct 23, 2017 4:08 pm

Use your fingernail to slide the white lock on the plug, it should move a couple millimeters and click. Then you can slide the terminals in through the rubber seal. Once they are pushed all the way in, simply slide the white lock back over.

the_bluester
Posts: 172
Joined: Wed Oct 24, 2007 3:19 pm

Re: Assembling ecu plugs

Postby the_bluester » Tue Oct 24, 2017 5:55 am

The other point is that the superseal 1.0 pins are finicky to get right. And if the insulation grip is not crimped pretty much perfectly you will have trouble getting the pin through the backshell.

The proper crimp tool for these pins is expensive.


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 2 guests