Batch Mode

Questions about the Elite Series ECU's? Ask here.
Claudman
Posts: 1
Joined: Tue Apr 10, 2018 4:57 am

Batch Mode

Postby Claudman » Tue Apr 10, 2018 5:11 am

I'm looking at running a VG30 with the Haltech 550. The stock ECU fires injectors in batch (all six at once) or group mode (1,2 3 at once, then 4,5,6 at once) so it really only has two injector drivers. I understand the 550 only has 4 injector drivers. I want to know if I can fire two or three injectors from a single injector driver. The injectors on the VG30 are low impedance. Also, since the VG30 uses distributor with an optical sensor inside, I will only need a single output to drive the ignition. Thanks for your input.

User avatar
HaltechMatthew
Haltech Staff
Posts: 2578
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Batch Mode

Postby HaltechMatthew » Fri Apr 13, 2018 1:24 pm

It will need a ballast resistor to fire multiple low impedance injectors. High impedance the 550 will fire up to 4 per driver.


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 3 guests