elite 2500 and racepack iq3 street

Questions about the Elite Series ECU's? Ask here.
Ed_rx7
Posts: 14
Joined: Sat Sep 27, 2014 8:53 am

elite 2500 and racepack iq3 street

Postby Ed_rx7 » Sun Jun 10, 2018 1:45 am

ok so i upgraded from a PS100 and iq3 display dash to a Elite2500 and IQ3 street

now problem im having is at first everything displayed on the dash as it should... however now i start the car ( only the third start up since fitting) the dash doesnt pull any figures through from the ECU... all the dash displays is batt voltage and Fuel level....other values are blank.

Whilst car was running i turned the ignition off ( whilst rolling and turned it back on and lifted the clutch and when the engine fired up again the dash read as it should!...... but when i got some fuel and started it up again it was reading blank again.?!

I have A three port can HUB which has my WBC connected to the middle port....ECU is to the first port and the dash is connected to the Third port.
I am running the can from the Main CAN connection , off the main ECU plug.


What settings should i have?

Im thinking there is either a conflict somewhere or maybe my can HUB is blown?

HELP please

Ed_rx7
Posts: 14
Joined: Sat Sep 27, 2014 8:53 am

Re: elite 2500 and racepack iq3 street

Postby Ed_rx7 » Mon Sep 10, 2018 12:50 am

Jeez......

Anyone?

I have also tried to update the racepak software to the latest version 3.14 (taken from the racepak website)

But the racepak says it’s incorrect.......

Why are things so difficult when they really shouldn’t have to be!!!!

Help please

User avatar
HaltechMatthew
Haltech Staff
Posts: 2542
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: elite 2500 and racepack iq3 street

Postby HaltechMatthew » Fri Sep 14, 2018 12:32 pm

Plug the dash directly into the ECU to see if it communicates.

pernati
Posts: 2
Joined: Tue Apr 13, 2010 10:32 pm

Re: elite 2500 and racepack iq3 street

Postby pernati » Thu Nov 08, 2018 5:08 am

did you done it ? need the same thing to do


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 4 guests