New 2.27 Firmware / 2.00.32 Software Release

Questions about the Elite Series ECU's? Ask here.
HaltechAdam
Haltech Staff
Posts: 242
Joined: Mon Jul 07, 2008 12:24 pm

New 2.27 Firmware / 2.00.32 Software Release

Postby HaltechAdam » Fri Aug 24, 2018 3:48 pm

Now Available via ESP online

Software also available here 2.00.32 Software Download

Thanks for your support :D

User avatar
HaltechMatthew
Haltech Staff
Posts: 2542
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby HaltechMatthew » Fri Sep 14, 2018 12:28 pm

Many updates there but my personal favourite in 2.27 is the throttle follower. Smooths the transition from open to closed throttle using the idle control system.

JimKden
Posts: 389
Joined: Wed Jan 12, 2011 2:28 am

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby JimKden » Sat Sep 15, 2018 4:52 am

Thermofan function - when a source other than the engine coolant temperature is selected, it would be convenient that the duty cycle table axis would default to that source instead of sticking to the engine coolant temperature. Reduces the head scratching as to why it isn't working as intended.

chaddy74
Posts: 4
Joined: Mon Sep 25, 2017 4:26 pm

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby chaddy74 » Mon Oct 08, 2018 7:00 pm

2.27.1 firmware has been awesome but 2.28 needs work I reckon! Has anyone updated to 2.28 successfully ?

User avatar
Drwaffles
Posts: 68
Joined: Sat Jul 28, 2018 11:51 pm

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby Drwaffles » Sat Oct 13, 2018 7:00 pm

upgraded no problem, that being said that I restart the car from a stall very quickly (Or a roll start) the knock sensors are constantly reading a fixed noise level until I power the system down completely.
Managed to capture it on recording.
Easy to work around by just letting it sit for 2 seconds+ before you crank.

https://youtu.be/UwoW3fZqDnQ

at 0:35 I turn the car off and restart, then you can see knock signal returns to normal.

JimKden
Posts: 389
Joined: Wed Jan 12, 2011 2:28 am

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby JimKden » Wed Nov 07, 2018 7:43 am

Firmware 2.29 and 2.00.35 is no better at not displaying my base fuel map. After the upgrade, it comes up gooseggs (all 0.000s). This was the case with 2.28 also. So I backed down to 2.27 and all is fine with ESP 2.00.35.
I wanted to use the feature where the thermofan doesn't run with key on and engine stopped.

chaddy74
Posts: 4
Joined: Mon Sep 25, 2017 4:26 pm

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby chaddy74 » Wed Nov 07, 2018 7:51 am

Yep thats what I got ! rolled back no issues !
JimKden wrote:Firmware 2.29 and 2.00.35 is no better at not displaying my base fuel map. After the upgrade, it comes up gooseggs (all 0.000s). This was the case with 2.28 also. So I backed down to 2.27 and all is fine with ESP 2.00.35.
I wanted to use the feature where the thermofan doesn't run with key on and engine stopped.

JimKden
Posts: 389
Joined: Wed Jan 12, 2011 2:28 am

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby JimKden » Wed Nov 07, 2018 7:56 am

I just plowed thru offline with the 2.27 tune file that was made and the base ignition map is zeroed also.

chaddy74
Posts: 4
Joined: Mon Sep 25, 2017 4:26 pm

Re: New 2.27 Firmware / 2.00.32 Software Release

Postby chaddy74 » Wed Nov 07, 2018 8:09 am

I spoke to my tuner about the Haltech firmware and software updates he said don't touch what isn't broken , I leave it to him now :)


Return to “Elite Series”

Who is online

Users browsing this forum: Baidu [Spider] and 7 guests