Wiring in my 1500. Relay and fuse questions.

Questions about the Elite Series ECU's? Ask here.
LotusEsprit1000
Posts: 18
Joined: Sat May 19, 2018 5:39 pm

Wiring in my 1500. Relay and fuse questions.

Postby LotusEsprit1000 » Sat Oct 06, 2018 5:46 pm

I am doing this for the first time and documenting it so there are no more questions about this process. I can also share the map I am building of the wiring. I do believe any idiot with a pad pen voltmeter and heat shrink can build a harness.

For relay 1 : I have a 10 amp fuse feeding pins 30 and 85 yes? dpo 6 is the ground for the electromagnetic solonoid yes?
Also The relay I have is 40A is that ok?

12 V ignition input... Eh... Uhh.... No fuse? I have a 10 pin fuse block. I could totally use unless its not needed.

What else should I fuse if anything?

User avatar
HaltechMatthew
Haltech Staff
Posts: 2573
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Wiring in my 1500. Relay and fuse questions.

Postby HaltechMatthew » Fri Oct 19, 2018 1:38 pm

If you are referring to the ECR then yes you have the wiring correct.

For all other relays, no you do not use constant power for the trigger of the relay you use ignition switched 12V+ so that 12V+ is not present with the ignition turned off.

Yes the ignition switch input should be fused. Typically this already is fused in the OEM wiring to your ignition switch.


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 4 guests