au ford falcon sensor settings

Questions about the Elite Series ECU's? Ask here.
deano4140
Posts: 1
Joined: Tue Nov 13, 2018 10:56 am

au ford falcon sensor settings

Postby deano4140 » Tue Nov 13, 2018 11:04 am

hello

im chasing the factory sensor settings so i can calibrate the new haltech elite 750 to the ecu, ive been searching the internet for the last 3 weeks and no real luck. does anyone know a way to find out the voltage/oms information.


thanks guys

T-Bird24
Posts: 30
Joined: Sun Aug 05, 2018 11:22 pm

Re: au ford falcon sensor settings

Postby T-Bird24 » Sun Dec 02, 2018 8:56 pm

i have installed an old haltech e11V2 in a EL falcon. i found alot of sensor info for coolant and air temp plus TPS sensor. on the ford falcon forms websites.

User avatar
HaltechMatthew
Haltech Staff
Posts: 2573
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: au ford falcon sensor settings

Postby HaltechMatthew » Mon Dec 03, 2018 1:20 pm

If it takes you this long to find it why not just swap the sensors for something with a known calibration? Temp sensors are almost throw-away cheap.

User avatar
Drwaffles
Posts: 71
Joined: Sat Jul 28, 2018 11:51 pm

Re: au ford falcon sensor settings

Postby Drwaffles » Wed Dec 05, 2018 11:20 pm

Manually scale them or replace them with known sensors.

If you buy or borrow a K-type thermocouple you can look at the AVI voltage or resistance at a given temperature and scale accordingly.
Boiling water or hot oil, immerse and watch it cool (Very boring, trust me)

Same with pressure sensor, use a vacc gauge or a mightyvac and manually scale.


Return to “Elite Series”

Who is online

Users browsing this forum: No registered users and 7 guests