AEM ugeo wideband wiring to elite 750

Questions about the Elite Software Programmer? Ask here.
skp_buggy
Posts: 23
Joined: Fri Nov 20, 2015 11:09 pm

AEM ugeo wideband wiring to elite 750

Postby skp_buggy » Tue Dec 06, 2016 7:14 am

Hi,
I have wired the white wire from AEM ugeo to the O2 input to elite 750 flying harness ( gray wire with orange strip) written on it O2, so the AEM gauge wiring i did like :

Red = ignition 12v
Black= chassis ground
White 0-5v = To haltech O2 input
Blue = not wired any where

Calibration :
0v = 10
5v = 20

After wiring the number gauge shown on laptop with value of 10 AFR and it didnt move, the gauge it self didn't read, after disconnecting the white wire the AEM gauge worked perfect
Any thoughts?

Thanks

superskaterxes
Posts: 18
Joined: Mon Sep 26, 2016 11:21 pm

Re: AEM ugeo wideband wiring to elite 750

Postby superskaterxes » Fri Mar 10, 2017 8:45 pm

if you search this topic on this board there are a few really good threads about it. Just helped a buddy set this up on his car as well (AEM O2 and E1500)
1989 LSX Foxbody
408CI LQ9, BW S480, Comp Cam, ID1700's, E85
Haltech [Elite 2500, CAN WBO2, FF Sensor, IO-Box A, IQ3 Street Dash]


Return to “Elite Software Programmer (ESP)”

Who is online

Users browsing this forum: No registered users and 2 guests