Firmware 2.21 minor glitch

Questions about the Elite Software Programmer? Ask here.
onfire
Posts: 36
Joined: Mon Jul 04, 2016 12:05 pm

Firmware 2.21 minor glitch

Postby onfire » Sun Feb 05, 2017 3:30 am

Race timer is activated and the ellipse is moving across the top row as the knob is on position 5.

I took a still frame off a video of the map whilst the engine was running to freeze the cell value at 20.

When the ellipse crosses into the cell with a 20 duty cycle in it the Ouput in the lower left corner of the picture should show 20. Instead it stays locked on zero. All of the other maps track the output correctly as the ellipse moves across the cells.

This one is stuck on zero for some reason.
Attachments
IMG_0059.PNG
IMG_0059.PNG (80.09 KiB) Viewed 1017 times

User avatar
blakebonkofsky
Posts: 165
Joined: Sun Aug 02, 2015 2:58 am

Re: Firmware 2.21 minor glitch

Postby blakebonkofsky » Sun Feb 05, 2017 6:02 am

What is your "Closed loop minimum TPS" set to? If you don't have that condition met, the duty cycle will stay at zero.
boost.png

onfire
Posts: 36
Joined: Mon Jul 04, 2016 12:05 pm

Re: Firmware 2.21 minor glitch

Postby onfire » Sun Feb 05, 2017 6:44 am

Good point. I'll try a key on engine off wot test. Odd thing is the other boost maps do track the output under the tps threshold as the ellipse crossed into each cell at idle. Target Boost etc. Since Duty is tied to the solenoids your probably right.

onfire
Posts: 36
Joined: Mon Jul 04, 2016 12:05 pm

Re: Firmware 2.21 minor glitch

Postby onfire » Sun Feb 05, 2017 10:37 am

Bummer. Thought you nailed it on tps but at wot it still is locked on zero on output data and logs zero even though everything else moves/logs with the timer.

onfire
Posts: 36
Joined: Mon Jul 04, 2016 12:05 pm

Re: Firmware 2.21 minor glitch

Postby onfire » Sun Feb 05, 2017 10:40 am

Pic
Attachments
IMG_0070.JPG
IMG_0070.JPG (48.95 KiB) Viewed 1002 times

User avatar
blakebonkofsky
Posts: 165
Joined: Sun Aug 02, 2015 2:58 am

Re: Firmware 2.21 minor glitch

Postby blakebonkofsky » Sun Feb 05, 2017 12:06 pm

What does your base duty cycle map look like? If you want, email me the log and the map and I'll take a look and see if I see anything.

blakebonkofsky@gmail.com

onfire
Posts: 36
Joined: Mon Jul 04, 2016 12:05 pm

Re: Firmware 2.21 minor glitch

Postby onfire » Sun Feb 05, 2017 12:54 pm

Base duty map attached. It works well. Boost by position works , boost by race timer works, etc. Just does not log or show on the ouput.
Attachments
IMG_0073.JPG
IMG_0073.JPG (33.69 KiB) Viewed 997 times

onfire
Posts: 36
Joined: Mon Jul 04, 2016 12:05 pm

Re: Firmware 2.21 minor glitch

Postby onfire » Mon Feb 06, 2017 4:44 am

Looks like there is no problem. Even though setting Closed Loop Base Output works with Knob Position vs Race Timer , it should not be set up this way.

Should be rpm vs target pressure corrected.

Will try that next.

User avatar
HaltechMatthew
Haltech Staff
Posts: 2251
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia
Contact:

Re: Firmware 2.21 minor glitch

Postby HaltechMatthew » Thu Feb 09, 2017 1:58 pm

The table doesnt update until it is being called. Hit positive pressure and you will see the table output change.


Return to “Elite Software Programmer (ESP)”

Who is online

Users browsing this forum: fritzz and 1 guest