Single Momentary Input that cycles

Questions about the Elite Software Programmer? Ask here.
Posts: 1
Joined: Mon Oct 02, 2017 8:31 am

Single Momentary Input that cycles

Postby diversat » Mon Oct 02, 2017 8:41 am

Is there a way to have a single momentary switch cycle through a series of channels or just cycle through a series of raw values? For example, a switch on the steering wheel that would step to the next value every time its pushed. i.e. push once it is raw1, push again steps to raw2, push again steps to raw3, etc. Kind of like a position switch, but with a momentary switch, not a dial.

User avatar
Haltech Staff
Posts: 2503
Joined: Tue Feb 07, 2012 11:45 am
Location: Sydney, Australia

Re: Single Momentary Input that cycles

Postby HaltechMatthew » Wed Oct 04, 2017 1:59 pm

There isn't sorry. If only because it has not been asked for and not really a thing we come across often enough to put the engineering time into it. Not knowing the current status is probably a good reason, and many competition build will use multi-position dials so one input can handle multiple functions.

What is the application?

User avatar
Posts: 55
Joined: Sat Jul 28, 2018 11:51 pm

Re: Single Momentary Input that cycles

Postby Drwaffles » Mon Aug 06, 2018 7:05 pm

I came up with a way to get a 2 mode toggle, but it requires two spare generic timers and two spare channels (Or one and whatever you want to enable has three conditions capable)


Return to “Elite Software Programmer (ESP)”

Who is online

Users browsing this forum: No registered users and 1 guest