4 posts • Page 1 of 1
HaltechMatthew wrote:Ignition Output 1 through 6 goes to Cyl 1 through 6. Constant Charge, Rising 3.0ms.
Yes. Found out the hard way on an Audi that the MSD DIS 4 ( and 4 Plus ) will not operate correctly with a Dwell rate of less than 2.5ms . 3.0ms should be ideal.
2.5ms dwell limit is not documented anywhere in MSD site or instructions, but finally found a helpful MSD Tech on Yellow Bullet forum that gave me this info.
Who is online
Users browsing this forum: No registered users and 4 guests