Hope someone can help confirm or my issue with the E8. Engine is a Mazda 2.5L v6 running 36-1 Monotronic crank sensor and NO cam sensor. Setup as wasted spark using HPI 6 for COP ignition, and semi-sequential injection paired 1-4, 2-5, & 3-6 using oem Mazda side feed 280cc 14 ohm injectors. Firing order is 1,2,3,4,5,6
I have good spark across all cylinders, get a consistent trigger count on the diagnostic trigger page, but only 3 of my injectors are opening (1, 2, & 6). Odd numbered cylinders on left bank, and even numbered cylinders on right bank. . I have done continuity test through all of the wiring, and all seems good. I believe my injectors are considered high impedance injectors because of the high resistance value (14 ohm). Is the E8 is not capable of operating 6 of this type of injectors when paired?
Can someone please help me diagnose the problem /reason that only 3 of 6 of my injectors are working? Needless to say, I'm stumped.
If I have interpreted anything incorrectly, please let me know. I appreciate the feedback.
2 posts • Page 1 of 1
- Haltech Staff
- Posts: 2619
- Joined: Tue Feb 07, 2012 12:45 pm
- Location: Sydney, Australia
You mention you have paired them so if one works the other has to work. Did you set the injector current to saturated to match your injectors?
Who is online
Users browsing this forum: No registered users and 5 guests