Search found 13 matches

by str8dum1
Tue May 17, 2011 3:24 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

Re: cam phasing turning off after car restart

Have you tried various firmwares to see if its still a problem? I am using 1.06now. I wonder if its the same problem with 1.00?

There must be a big rewrite with V1.10 that coming out to control the I/O box. Hopefully someone fixed that bug!!
by str8dum1
Fri Apr 22, 2011 12:45 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

Re: cam phasing turning off after car restart

So, even with my new tune, I am still seeing cam phasing issues. Very obvious when you look at the powerband and it really makes tuning the map a real whore, since its completely different cells getting used on the map! Here's a pull where the cam phasing isnt turning on (MAP vs HP) forged 4-18-11 0...
by str8dum1
Fri Apr 22, 2011 12:16 am
Forum: Platinum Pro Harness
Topic: Cruise control issue, decel ignition retard.
Replies: 7
Views: 7315

Re: Cruise control issue, decel ignition retard.

how did you do this exactly? i cant seem to type anything in those boxes.. and by lower voltage, you mean that say actual 0% is 0.69V. You would set it to 0.65V, correct? Thanks, struggling with similar issues By setting the APP 0% voltage box on the TPS tab of the Main Setup menu slightly below wha...
by str8dum1
Mon Mar 28, 2011 10:44 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

Re: cam phasing turning off after car restart

no to both those issues.

obviously not valve float...
by str8dum1
Tue Oct 19, 2010 8:58 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

Re: cam phasing turning off after car restart

I know its definitely on 2003's and at least 2 different G35s, one being tuned exclusively by Hal at Injected. Its hard to gather more examples as the smaller the turbo, the less you'd probably notice the lag.

But its 100% obvious on the dyno.
by str8dum1
Thu Oct 14, 2010 11:44 am
Forum: Platinum Pro Harness
Topic: Using 350z plug-in on 350HR car
Replies: 3
Views: 4914

Re: Using 350z plug-in on 350HR car

can Haltech support list what each of the 10 Analog voltage inputs are for (AVI1 thru AVI10)

I know 6 and 8 are for the widebands. That would be helpful in wiring up the harness.
by str8dum1
Thu Oct 14, 2010 11:39 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

Re: cam phasing turning off after car restart

there doesnt seem to be a solution. Haltech tech support does not even acknowledge this as an issue when its affecting multiple vehicles.
I might try using a later model non-rev ECU next time i go to my tuner cuz I know 2004-2005 models dont seem to have this issue (at least RCDash doesnt)
by str8dum1
Wed Sep 15, 2010 10:12 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

Re: cam phasing turning off after car restart

Another attempt at an answer from Haltech.. 2003.5 G35c

Here's the dyno graph showing the difference. 1st dyno (pink line) after the car was restarted and then the next pull (green line). Cams phasing off then cam phasing on....
Image

WTF
by str8dum1
Wed Aug 18, 2010 2:12 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

Re: cam phasing turning off after car restart

any updates? no one else sees this problem besides 2003 G35's??
by str8dum1
Fri Jul 23, 2010 8:51 pm
Forum: Tuning Discussions
Topic: Inj Firing angle
Replies: 12
Views: 15035

Inj Firing angle

edit-- i guess the more pertinent question is, does anyone with a VQ motor mess with these values over stock #s. Running 2000cc injectors and JWT C2 cam. There isnt much description on the manual as to what Inj firing angle is. It just says "Check your Injection Angle and adjust for smoothest i...
by str8dum1
Thu May 13, 2010 5:52 am
Forum: Platinum Pro Harness
Topic: cam phasing turning off after car restart
Replies: 35
Views: 22667

cam phasing turning off after car restart

Hey guys, Got a problem that has been seen by other 2003 G35 owners as well. I am running the latest firmware (1.06) If you turn the car off, restart is and do a pull, the cam phasing does not activate. After 2 or 3 WOT pulls, then the cam phasing works. It was very obvious on the dyno by watching t...
by str8dum1
Tue Mar 23, 2010 12:24 pm
Forum: Platinum Pro Harness
Topic: Firmware isses for the 2003 model year G/Z
Replies: 5
Views: 3953

Re: Firmware isses for the 2003 model year G/Z

Who would buy a $2000USD EMS without active knock control, long term fuel trims,CAN bus monitoring, etc. Those are all things you need the later revisions for. Not to mention that my 'AUX Output' grounds when the car is in the 'ACC ON' position. Good thing I noticed that before I plumbed up my metha...
by str8dum1
Mon Mar 22, 2010 3:45 am
Forum: Platinum Pro Harness
Topic: Firmware isses for the 2003 model year G/Z
Replies: 5
Views: 3953

Firmware isses for the 2003 model year G/Z

So i finally finished my 2003 G35 build. Load up the latest 1.06 firmware with the G35 wheel speed corrections from http://www.injectedperformance.com/haltech/ With this firmware, the car misfires very badly, even under just idle revving. So I went thru the checklist of things to narrow down the pro...

Go to advanced search