Search found 14 matches

by suprasam
Wed Sep 26, 2018 3:43 am
Forum: Elite Series
Topic: HOW TO LOAD MY BASEMAP OF PS1000 IN ELITE1000
Replies: 2
Views: 531

Re: HOW TO LOAD MY BASEMAP OF PS1000 IN ELITE1000

Pretty much JimKden said...however, there are some tables that translate directly over like prime pulse. If anything you can copy and paste table values.
by suprasam
Mon Apr 25, 2016 12:33 am
Forum: Platinum Pro Plug-in
Topic: bnr32 haltech boost control solenoid install
Replies: 2
Views: 1766

Re: bnr32 haltech boost control solenoid install

not familiar with the bnr32 and oem wiring but try the 12volt from the ecu or battery. the oem wire my not be the correct wire for 12 volt output
by suprasam
Wed Feb 24, 2016 4:58 am
Forum: Platinum Pro Plug-in
Topic: Tuning for GTR R34‏
Replies: 20
Views: 7841

Re: Tuning for GTR R34‏

I got a gauge art for my g35. it works well and is pretty cool but for the price I think there could and should be better ways to display the data considering it comes off of the can wires. I was thinking about researching and testing some. custom Obd2 solutions that could tie into the haltech can c...
by suprasam
Tue Feb 02, 2016 6:06 am
Forum: Platinum Pro Plug-in
Topic: Boost solenoid plumbing for closed loop
Replies: 2
Views: 2413

Re: Boost solenoid plumbing for closed loop

Chris, are you still rocking the greddy twin kit? I had issues with closed loop for a while as well. I managed to get it to work with the setup according to turbosmart layout for maximum boost. I am able to control boost up to 27psi. I have not tried the above post but may give it a shot to see what...
by suprasam
Sat Dec 05, 2015 3:22 am
Forum: Platinum Pro Plug-in
Topic: boost target table
Replies: 0
Views: 3297

boost target table

So i've got my closed loop working and setup. I am using gear and rpm as my target table axis. I was wondering what others were using. I have the ability to do a seperate gear adjust table so i could change an axis on the target table. I would like to hear what you use! Thanks.
by suprasam
Sun Nov 01, 2015 10:08 am
Forum: Platinum Pro Plug-in
Topic: closed loop boost control start duty
Replies: 1
Views: 1203

closed loop boost control start duty

Am I supposed to have a start duty table for closed loop boost control on a 350z pro plug in? I've been having issues getting closed loop boost control to work and some of the guides I see mention a start duty table.
by suprasam
Sat Aug 29, 2015 1:45 pm
Forum: Platinum Pro Plug-in
Topic: 350z proplugin closed loop boost control issues
Replies: 8
Views: 2468

Re: 350z proplugin closed loop boost control issues

Can I send you my map and see how I have it set up?
by suprasam
Sat Aug 29, 2015 11:37 am
Forum: Platinum Pro Plug-in
Topic: 350z proplugin closed loop boost control issues
Replies: 8
Views: 2468

Re: 350z proplugin closed loop boost control issues

Right I understand how it should work. But it doesnt. Here is an example. My base duty for 12 psi is 25%. After offset of 7 psi the duty output goes to 100% thought out the entire rpm range while under WOT...no matter how much P I add the output duty doesn't try to get close to 25%.
by suprasam
Sat Aug 29, 2015 1:34 am
Forum: Platinum Pro Plug-in
Topic: 350z proplugin closed loop boost control issues
Replies: 8
Views: 2468

Re: 350z proplugin closed loop boost control issues

Thanks for the reply. I understand the duty cycle and plumbing stuff. My issue is that the computer isn't even outputing any duty cycle other than 100 or 0%. Shouldn't i see some activity as i start moving into boost? If you look at my screen shot you can see where i changed from to closed loop and ...
by suprasam
Fri Aug 21, 2015 1:34 pm
Forum: ECU Manager
Topic: Software Debacle, Bugs and Features
Replies: 10
Views: 6143

Re: Software Debacle, Bugs and Features

I hear you. Running through the logs can be a pain.

I did your trick and it worked perfectly! Thanks for the tip! I was about to start building excel formulas!
by suprasam
Fri Aug 21, 2015 2:58 am
Forum: ECU Manager
Topic: Software Debacle, Bugs and Features
Replies: 10
Views: 6143

Re: Software Debacle, Bugs and Features

ITXGENX, this looks like an awesome tool! I would like to find out more. The gist of it is we need to re-lable our datalog to work with the program. Is there a need for any excel calculations to make a file work? I would like do target v actual afrs easily and this method looks like it will help a t...
by suprasam
Fri Aug 21, 2015 1:07 am
Forum: Platinum Pro Plug-in
Topic: When tuning on E85
Replies: 2
Views: 1420

Re: When tuning on E85

So for me i use flex fuel sensor and the compensation maps add to the base with out changing flowrate to hit target AFR.

I wouldn't see why you would not put the actual flow rate. As long as your base fuel map is hitting your desired AFR.
by suprasam
Wed Aug 19, 2015 1:06 pm
Forum: Platinum Pro Plug-in
Topic: 350z proplugin closed loop boost control issues
Replies: 8
Views: 2468

Re: 350z proplugin closed loop boost control issues

Attached is a screen shot of open loop duty then closed loop duty. Any ideas?

data log capture.PNG
by suprasam
Tue Aug 18, 2015 4:38 am
Forum: Platinum Pro Plug-in
Topic: 350z proplugin closed loop boost control issues
Replies: 8
Views: 2468

350z proplugin closed loop boost control issues

Hello. I know this is not a completely new topic but I haven't seen anyone with the same exact issue. I have a 350z pro plug in. We have tuned the open loop boost table up to 24 psi. I take the portion from the open loop map and put it into the closed loop base duty table. With PID set to zero I set...

Go to advanced search