Search found 9 matches

by r34gtt
Sun Oct 25, 2020 5:06 pm
Forum: Platinum Pro Plug-in
Topic: RB25 No RPM Signal
Replies: 1
Views: 451

Re: RB25 No RPM Signal

I back probed the sensors and have the expected voltage (5V) on both sensors. The signal wire also changes from 5V to 0V when i wave a screwdriver in front of it so it would appear they are working as expected. I have also back probed signal from the ECU to the sensors and have continuity so all app...
by r34gtt
Wed Oct 14, 2020 5:34 pm
Forum: Platinum Pro Plug-in
Topic: RB25 No RPM Signal
Replies: 1
Views: 451

RB25 No RPM Signal

Hi all, Trying to start my R34 Rb25 neo after installing a platinum pro+ Many mechanical upgrades. It cranks but will not start. First thing i notice is that in Ecu Manager the RPM counter is reading 0 even while cranking. I have rechecked the Gap on the crank and cam triggers is 1mm I have gone to ...
by r34gtt
Thu Dec 27, 2018 1:37 pm
Forum: Platinum Pro Plug-in
Topic: Thermofan and A/C fan control
Replies: 0
Views: 1679

Thermofan and A/C fan control

Hey all, Got a haltech platinum pro on my R34 GTT skyline. I have removed the viscous fan and replaced it with dual thermofans, since i am doing this i also want to remove the standard A/C fan since this function should be incorporated into the new electric fans. I understand for the fans to be cont...
by r34gtt
Sun Nov 11, 2018 4:16 pm
Forum: Platinum Pro Plug-in
Topic: Refeigerant pressure sensor - function not avalible.
Replies: 1
Views: 1091

Refeigerant pressure sensor - function not avalible.

Hi all, I have an rb25det R34 Gtt In the ecu Pinout pin 57 is labled as : Refrigerant pressure sensor signal * function not avalible. How does the a/c system function without this? Does it just assume the pressure is ok? Doing a wire tuck on my r34 running platinum pro, the pressure sensor has 3 wir...
by r34gtt
Wed Sep 05, 2018 3:07 pm
Forum: Platinum Pro Plug-in
Topic: Map Switching and boost control
Replies: 0
Views: 1459

Map Switching and boost control

Hey, I have an R34 GTT and running haltec Platinum Pro and trying to connect a Aquamist HFS3 Water injection kit. The HFS3 has a few options for when the system is Switched off or reaches a 'failsafe condition', it asks for: Ignition switched 12v, Fuel Injector (-), MAP sensor as well as an optional...
by r34gtt
Tue Aug 07, 2018 8:36 pm
Forum: Platinum Pro Plug-in
Topic: Haltec Idle air controller With platinum pro RB25 NEO
Replies: 1
Views: 1518

Haltec Idle air controller With platinum pro RB25 NEO

Hey, I have an Rb25 NEO and would like to get rid of the factory IAC/AAC valve and replace it with an all electric type. I see haltec offer 2 port/4port and 1 screw/2 screw motor style. https://www.haltech.com/product/ht-020310-idle-air-control-kit-billet-4-port-housing/ https://www.haltech.com/prod...
by r34gtt
Sun Nov 06, 2016 9:02 pm
Forum: Platinum Pro Plug-in
Topic: Rb25det - Wiring Map, IAT, Crank trigger, Map switching,
Replies: 7
Views: 6387

Re: Rb25det - Wiring Map, IAT, Crank trigger, Map switching,

1) Ok i see, So since there is 4 AVI inputs and only 2 grounds everything on the auxillary harness must share these 2 grounds? 2) Yes 5v indeed, since i plan on using the factory wiring for the map i will need to find what pins these correspond to at the ecu plug and rewire it into the AV1 on the au...
by r34gtt
Wed Nov 02, 2016 8:55 pm
Forum: Platinum Pro Plug-in
Topic: Rb25det - Wiring Map, IAT, Crank trigger, Map switching,
Replies: 7
Views: 6387

Re: Rb25det - Wiring Map, IAT, Crank trigger, Map switching,

Thanks for the quick reply, just need to clarify a few things On the rear auxiliary connector description it says '4 additional analogue voltage inputs (AVI)' and on the pinout for the rear auxiliary harness it shows 4 wires corresponding to each AVI, however there is only 2 'signal ground' wires. U...
by r34gtt
Tue Nov 01, 2016 8:49 pm
Forum: Platinum Pro Plug-in
Topic: Rb25det - Wiring Map, IAT, Crank trigger, Map switching,
Replies: 7
Views: 6387

Rb25det - Wiring Map, IAT, Crank trigger, Map switching,

Hey guys, Trying to sort out my haltec platinum pro on my R34 GTT manual, rb25det NEO. First time doing this so got a few questions and confusion.. 1) Wiring of of IAT Intake air temp sensor. I have had a read of http://forums.haltech.com/viewtopic.php?f=28&t=4583 But i have already deleted my m...

Go to advanced search