Search found 5 matches

by JEALES
Mon Oct 04, 2021 6:53 pm
Forum: Elite Series
Topic: Elite 750 IAC setup ( falcon IAC valve
Replies: 0
Views: 20

Elite 750 IAC setup ( falcon IAC valve

Hi all, Have wired in my new elite 750 and everything except the idle control seems to work. Using ford falcon IAC valve. Valve is working as I can hear it buzzing when ignition is on, but no matter what I set the target idle at it doesn't seem to move from 1100rpm. Have had this setup working on an...
by JEALES
Wed Sep 15, 2021 8:05 pm
Forum: Elite Software Programmer (ESP)
Topic: Leaning out when reached operating temperature
Replies: 3
Views: 88

Re: Leaning out when reached operating temperature

Sorry, forgot to mention... I haven't actually done any adjustment to the VE table as supposedly if the information the ecu has is correct, I shouldn't need to.

Cheers
by JEALES
Wed Sep 15, 2021 8:02 pm
Forum: Elite Software Programmer (ESP)
Topic: Leaning out when reached operating temperature
Replies: 3
Views: 88

Re: Leaning out when reached operating temperature

Thanks mate. Some very useful tips. I most definitely will not be doing any of the WOT tuning as I am the first to admit my inexperience and like you said " don't want to blow my engine up". Basically just want to be able to start it and maybe go for a bit of a drive in it to bed the rings...
by JEALES
Wed Sep 15, 2021 8:23 am
Forum: Elite Software Programmer (ESP)
Topic: Leaning out when reached operating temperature
Replies: 3
Views: 88

Leaning out when reached operating temperature

Hey all, Just wondering if there's anything I coukd have potentially missed on my setup parameters. Runs like a dream until it reaches operating temp then it start to lean right out and miss. Its a mildly modified Suzuki G13B turbo, no aftermarket cams or anything fancy. Has a 60mm SR20 throttle bod...
by JEALES
Sat Jul 24, 2021 9:29 pm
Forum: Elite Series
Topic: Elite 750 G13B Trigger setup enquiry
Replies: 1
Views: 263

Elite 750 G13B Trigger setup enquiry

Hey all, Just purchased an Elite 750 to replace my old Wolf V4. Just wondering how I got about setting up the Trigger parameters in the esp software. The trigger wheel is driven off the inlet cam and has a 4+1 tooth pattern. There's Generic multi tooth + home to select on the software but just a lit...

Go to advanced search