The brake switch is just a saftey feature for DBW. It can limit the amount of throttle you can have when the brake is pressed just in case something goes wrong with the pedal and you're not actually trying to accelerate (think toyota un-intended acceleration problems). The brake switch on the pedal ...

have you tried capping off the idle valve to see if that's even supplying the air?

if so try cleaing out the inside of the idle valve with brake cleaner, it might be all gummed up

if you unplug the valve what happens?

you can do that now, you simply set the water pump up as a generic out put with 3D table. enable turbo timer, then use the ignition switch to trigger the water pump to cool down, you can also adjust how long the motor runs on with the turbo timer and how long it runs just the fans and pump. i have ...

What is the wifi light on the PD16 used for?

I don't see any mention of it anywhere in any of the manuals or software.

I'm running a Pierburg CWA400 water pump where the speed is controlled by a low current PWM output rather than variting the voltage of the high current power supply. Currently I'm controlling it using an independent controller: https://www.tecomotive.com/en/products/tinycwa.html This seems like it w...