Problems with a old E6M-8

Postby **Flappes** » Mon Jul 03, 2017 10:52 pm

Hello,

i think my ecu is not okay.
I want to give it to an electrical engineer to check it.
Do you have any wiring diagramms of this old ecu, and is it possible to send this per mail ?

Its not profitable for me to send this ecu from Germany to Australia for check or reparation.
therefore the ecu is to old to invest a lot of money.

greets Christian

Postby **HaltechMatthew** » Tue Jul 04, 2017 2:47 pm

Time for the bin I am sorry to say. The ECU is too old to repair with no parts available and we have no support for this very rare and very old ECU model.

Postby **Flappes** » Mon Jul 17, 2017 5:56 pm

I can get an E6K for a Test.
Is its right that the E6K is the same than the E6M ?
Can i use my E6M Harness ?
I only must load my Saved Map to the E6K ?

Postby **HaltechMatthew** » Tue Jul 18, 2017 2:38 pm

They are the same ECU except missing the PWMs from my memory in the 1990's. I think even the software may work between them.

Postby **Flappes** » Wed Jul 19, 2017 5:38 pm

Thanks.

This is the only Difference in the Wirring diagramm i readed.