Haltech E6K + idle

[WidebodyWoody]

Hey guys

I am trying to run a valve that opens up to help with cold idle on my car. The valve is a 12VDC valve. What would I wire this up to on my haltech in order to program this to turn on below a certain temp and turn off above it?

Using something similar to this: http://files.haltech.com/downloads/acce ... ns_web.pdf

http://www.haltech.com/wp-content/uploa ... omRevF.pdf

Thanks

[HaltechMatthew]

Wire it to switched 12V+ and to a spare PWM. If this is a normal idle valve then set it as BAC and start tuning.

[WidebodyWoody]

Thank you for your help. I'll wire it up to that.