How to Find Trigger Settings

bvega92
Posts: 8
Joined: Fri Apr 24, 2020 5:49 am

How to Find Trigger Settings

Postby bvega92 » Fri Aug 21, 2020 2:38 am

Hello,

How do I know the trigger settings for the factory sensor of a Hyundai Nu 2.0L engine?

Orangeblue
Posts: 151
Joined: Mon Apr 08, 2019 5:54 am
Location: Germany

Re: How to Find Trigger Settings

Postby Orangeblue » Fri Aug 21, 2020 10:09 am

Trigger pattern or tdc offset?

Trigger pattern can be found easy with a google search, or in the workshop manual.
Check EPC, find the triggerwheel/-disk or pully, google picture the partnumber, 23141-2E00 in your case ?
Should be 60-2 on the crank and half moon on intake and exhaust cam, hard to tell without build date of the engine/car...

TDC offset has to be determined for each engine typ individually.
https://www.youtube.com/watch?v=2yoxiKJ1KzY
https://www.youtube.com/watch?v=HW0ENqcxNSg
Image
'92 Opel Omega Wagon
'94 Opel Astra 'vert

bvega92
Posts: 8
Joined: Fri Apr 24, 2020 5:49 am

Re: How to Find Trigger Settings

Postby bvega92 » Fri Aug 21, 2020 12:16 pm

Orangeblue wrote:Trigger pattern or tdc offset?

Trigger pattern can be found easy with a google search, or in the workshop manual.
Check EPC, find the triggerwheel/-disk or pully, google picture the partnumber, 23141-2E00 in your case ?
Should be 60-2 on the crank and half moon on intake and exhaust cam, hard to tell without build date of the engine/car...

TDC offset has to be determined for each engine typ individually.
https://www.youtube.com/watch?v=2yoxiKJ1KzY
https://www.youtube.com/watch?v=HW0ENqcxNSg


Hey! Thanks for your response!

As far as the TDC, it's 117 or 477 degrees :)

The trigger signal is what actually has me buzzing...

I believe you're right on the mark, thanks for your input, will reply when I have more updates!


Return to “Off-Topic”

Who is online

Users browsing this forum: No registered users and 1 guest