Couple 350z questions

Questions about the Platinum Pro Plug-in ECU's? Ask here.
Enriquez2000
Posts: 5
Joined: Thu May 30, 2019 1:07 pm

Couple 350z questions

Postby Enriquez2000 » Fri May 31, 2019 8:45 am

I will be putting the pro platinum ecu in this car. Previous owner bought it but used a flash tune(revup). I will be dropping in gtr injectors as well.

As for gtr injectors, do you have data readily available to input into the flow and dead time areas?

Next would be wideband. Car came with a glowshift wideband. Ideally Ill swap to a dual wideband but in the meantime is there any data about the voltages for this particular wideband so I can get the car runnibg quicker?

Thanks for your help. New to haltech but looking forward to working with it!

User avatar
HaltechMatthew
Haltech Staff
Posts: 2912
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Couple 350z questions

Postby HaltechMatthew » Fri May 31, 2019 9:31 am

Maybe grab the injector data from one of the R35 base maps. You should be able to import it.

You would get your wideband data from the manufacturer for 0-5V calibration. Easy to enter in the software.

Enriquez2000
Posts: 5
Joined: Thu May 30, 2019 1:07 pm

Re: Couple 350z questions

Postby Enriquez2000 » Tue Jun 04, 2019 12:01 am

How much of the 0 to 5volt data do i need?

I have all the vrages but only room for a few values i haltech software

User avatar
HaltechMatthew
Haltech Staff
Posts: 2912
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Couple 350z questions

Postby HaltechMatthew » Tue Jun 04, 2019 10:14 am

Usually it only needs 2 points for a normal linear input. But you can enter many more if needed, it is why there are blank boxes next to the existing calibration numbers.


Return to “Platinum Pro Plug-in”

Who is online

Users browsing this forum: No registered users and 1 guest