Can I operate a Nitrous using Pro Plugin for Nissan Patrol Y61

Questions about the Platinum Pro Plug-in ECU's? Ask here.
SONofSUN
Posts: 73
Joined: Mon Jan 27, 2014 5:32 am

Can I operate a Nitrous using Pro Plugin for Nissan Patrol Y61

Postby SONofSUN » Thu Mar 05, 2020 1:12 am

Hello everyone,

I have a Pro Plugin for Nissan Patrol Y61. Is there a way to operate a nitrous selenoid with this ECU. The ECU plugs in directly onto the factory harness.

thanks,

User avatar
HaltechMatthew
Haltech Staff
Posts: 3304
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Can I operate a Nitrous using Pro Plugin for Nissan Patrol Y61

Postby HaltechMatthew » Thu Mar 05, 2020 9:34 am

Yes, turn on the Nitrous in the Outputs section. :roll:

SONofSUN
Posts: 73
Joined: Mon Jan 27, 2014 5:32 am

Re: Can I operate a Nitrous using Pro Plugin for Nissan Patrol Y61

Postby SONofSUN » Tue Mar 10, 2020 12:55 am

HaltechMatthew wrote:Yes, turn on the Nitrous in the Outputs section. :roll:

Matthew, there are no spare DPO, AVI that I can wire my Nitrous components to. This Haltech ECU replaces the factory ECU and plugs in directly into the factory connector.

User avatar
HaltechMatthew
Haltech Staff
Posts: 3304
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: Can I operate a Nitrous using Pro Plugin for Nissan Patrol Y61

Postby HaltechMatthew » Mon Mar 16, 2020 2:35 pm

Main Setup / Outputs. Go to a spare DPO, tick the box to turn it on, select NOS Activation Signal
Same process for setting up an activation switch, but in Inputs.

Input and Output pins are on the Aux Connector on your ECU next to the USB port. Wiring and pin info is in the Help section of the ECU Manager software.

You cannot directly connect a Nitrous solenoid. It must be relayed and I would use a solid state relay to do that.


Return to “Platinum Pro Plug-in”

Who is online

Users browsing this forum: No registered users and 1 guest