rb26 air tempeture sensor position

Questions about the Platinum Pro Plug-in ECU's? Ask here.
lenny gtr r33
Posts: 2
Joined: Wed Jun 05, 2019 12:21 am

rb26 air tempeture sensor position

Postby lenny gtr r33 » Wed Apr 22, 2020 4:02 am

What is the best position to put the air temperature sensor, some say that in the same position as the oem sensor, others for the intercooler! Can somebody help me? its r33 gtr im using haltech platinun pro plug and play

User avatar
Nissanman
Posts: 135
Joined: Sat Mar 15, 2008 2:40 pm
Location: Adelaide, South Australia
Contact:

Re: rb26 air tempeture sensor position

Postby Nissanman » Wed Apr 22, 2020 10:56 am

After the intercooler but before the throttle body[s].
Nissanman, just trying to help.....

User avatar
HaltechMatthew
Haltech Staff
Posts: 3304
Joined: Tue Feb 07, 2012 12:45 pm
Location: Sydney, Australia
Contact:

Re: rb26 air tempeture sensor position

Postby HaltechMatthew » Thu Apr 23, 2020 9:34 am

You are tried to measure how much air is going into the engine, so measuring it where you measure load is ideal.

MAF have them in the MAF unit.
TMAP have them built into the MAP sensor unit.

So as near to the MAP sensor source as possible will give the best results. If not practical, then near the throttle body as mentioned will be a reasonable compromise.


Return to “Platinum Pro Plug-in”

Who is online

Users browsing this forum: No registered users and 1 guest